STAT-Dx DiagCORE Respiratory Panel 2 Instructions For Use Manual page 30

NOTE
NOTE
3. When prompted, scan the barcode of the DiagCORE
The DiagCORE
barcode.
NOTE
4. Select the appropriate sample type from the list.
5. The Confirm screen will appear. Review the data entered and make any necessary changes
by pressing the relevant fields on the touchscreen and editing the information.
6. Press Confirm when all the displayed data are correct. If needed, press on the appropriate field
to edit its content, or press Cancel to cancel the test.
30 DiagCORE Respiratory Panel 2 Instructions for Use
Depending on the chosen system configuration, entering the patient ID may
also be required at this point.
Instructions from the DiagCORE
the bottom of the touchscreen.
Analyzer automatically recognizes the assay to be run, based on the cartridge
®
The DiagCORE Analyzer will not accept cartridges with elapsed expiration
®
date, previously used cartridges or cartridges for assays that are not
installed on the unit. An error message will be shown in these cases and the
cartridge will be rejected. Refer to the DiagCORE
further details.
Analyzer appear in the Instructions Bar at
®
Respiratory Panel 2 Cartridge to be used.
®
Analyzer User Manual for
®