Running A Test - STAT-Dx DiagCORE Respiratory Panel 2 Instructions For Use Manual

NOTE The power switch at the back of the Analytical Module must be set in the "I"
position. The DiagCORE
2. Wait until the Main screen appears and the DiagCORE
and stop blinking.
3. Log in to the DiagCORE
NOTE The Login screen will appear if User Access Control is activated. If the User
Access Control is disabled, no user name/password will be required and the
Main screen will appear.
4. In case the Assay Definition File software has not been installed in the Analyzer follow the
instructions prior to running the test (See Section 9 of this document for additional information).

6.4 Running a test

1. Press the Run Test button at the top right corner of the touchscreen of the DiagCORE
2. When prompted, scan the sample ID barcode on the UTM tube containing the sample, or scan
the specimen information barcode placed on the top of the DiagCORE
front barcode reader that is integrated into the DiagCORE
NOTE
It is also possible to enter the sample ID using the virtual keyboard of the
touchscreen by pressing on the Sample ID field.
Analyzer status indicators turn blue in this case.
®
® Analyzer by entering the user name and password.
Analyzer status indicators turn green
®
cartridge, using the
®
Analyzer.
®
DiagCORE Respiratory Panel 2 Instructions for Use
Analyzer.
®
29