Interpretation Of Results; Viewing Results - STAT-Dx DiagCORE Respiratory Panel 2 Instructions For Use Manual

8

Interpretation of results

8.1 Viewing results

The DiagCORE Analyzer automatically interprets and saves test results. After ejecting the
®
cartridge, the Results Summary screen is automatically displayed.
Example screen showing Test Data on the left panel and Test Summary in the main panel.
The main part of the screen provides the following two lists and uses color-coding and symbols to
indicate the results:
The first list includes all pathogens detected and identified in the sample, preceded by a

sign and are colored red.
The second list includes all pathogens tested in the sample. Pathogens detected and identified

in the sample are preceded by a
not detected are preceded by a
Note that the pathogens detected and identified in the sample are shown in both lists.
In case the test failed to complete successfully, a message will indicate "Failed" followed by the
specific Error Code.
The following Test Data is shown on the left side of the screen:
Sample ID

Assay Type

Sample Type

sign and are colored red. Pathogens that were tested but
sign and are colored green.
DiagCORE Respiratory Panel 2 Instructions for Use 35