STAT-Dx DiagCORE Respiratory Panel 2 Instructions For Use Manual page 37

Amplification Curves screen (Pathogens and Controls).
The amplification plot displays the data curve for the selected pathogens or controls. To alternate
between logarithmic or linear scale for the Y-axis, press the Lin or Log button at the bottom left
corner of the plot.
The scale of the X-axis and Y-axis can be adjusted using the gray pickers on each axis. Press and
hold a picker and then move it to the desired location on the axis. Move a picker to the axis
origin to return to the default values.
8.1.2 Viewing test details
Press Test Details in the Tab Menu Bar at the bottom of the touchscreen to review the results in
more detail. Scroll down to see the complete report.
The following Test Details are shown in the center of the screen:
User ID

Cartridge serial number

Cartridge expiration date

Analytical Module serial number

Test status (completed, failed, canceled by operator)

Error code if applicable

Test start date and time

Test execution time

Assay name

Test ID

Test Result: Positive (in case at least one respiratory pathogen is detected/identified), negative

(in case no respiratory pathogen is detected) or failed (an error occurred or the test was
canceled by the user)
DiagCORE Respiratory Panel 2 Instructions for Use 37