Adjusting Rea Headrest; Adjusting Position Of Rea Headrest Or Neckrest; Adjusting Height Of Rea Headrest Or Neckrest - Invacare Dragon Vertic User Manual

5.9 Adjusting Rea Headrest

CAUTION!
Risk of injury during use of the mobility device
as a vehicle seat if a headrest is wrongly
adjusted or not installed
This can cause the neck to be hyperextended
during collisions.
– A headrest must be installed. The headrest
optionally supplied for this mobility device by
Invacare is perfectly suitable for use during
transport.
– The headrest must be adjusted to the user's
ear height.

5.9.1 Adjusting Position of Rea Headrest or Neckrest

The adjustment of the position is the same for all Rea
headrests and neckrests.
1451170-L
• 5 mm Allen key
1. Loosen the screws A , B or the clamping lever C.
2. Adjust the headrest or neckrest to the required position.
3. Retighten screws and clamping lever.
4. Loosen the Allen screw D.
5. Slide the headrest left or right to the required position.
6. Retighten the Allen screw.

5.9.2 Adjusting Height of Rea Headrest or Neckrest

The adjustment of the height is the same for all Rea
headrests and neckrests.
Setup
39