Table of Contents
Advertisement
Installation & Operation
3.4 Ethernet
3.4
Ethernet
When installing and connecting the Ethernet connection, observe the applicable general
conditions and their legal basis.
The Ethernet connection is connected to the Ethernet socket of the device. The cable must be
connected to the RJ45 plug before connection to the socket.
For the power supply of the device over PoE, a corresponding infrastructure such as PoE
adapter or PoE switch is required.
The device is preset to DHCP as standard. The Locating Manager server address 192.168.1.10
is configured on the device.
3.5
Operation
The device is not suitable for operation in hazardous areas.
Operation of the system according to EN 62368-1 is only safe when the housing cover is
installed (cooling, fire protection, interference suppression).
In case of emergencies (e.g. when the enclosure is damaged, when liquids or foreign objects
are entering the device), the device must be disconnected from the power supply and
maintenance must be contacted immediately.
3.6
Cleaning and maintenance
The device may only be opened by suitably trained and qualified users. Only authorized
dealers are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may cause substantial risks to
the user. As soon as the device was opened without permission, warranty and liability of the
Siemens AG are rendered null and void.
Do not clean the enclosure with abrasive, alkaline or aggressive cleaning products or aids.
22
Operating Instructions, 09/2021, C79000-G8976-C559-03
SIMATIC RTLS4330G
Advertisement
Table of Contents
