Table of Contents
Advertisement
Sounds
You can adjust the volume of the ringer, keybeep, and earpiece on the Sounds menu.
In addition, you can select the type of sounds heard when the phone rings and when
you press buttons. (See page XX for instructions on how to reach the Sounds menu.)
Adjusting the ringer volume [F21]
1
Push
to select Ringer Vol from the Sounds menu.
The Ringer Vol. menu appears.
2
Turn
up to raise the ringer volume, and down to lower it.
You can select from six ringer volume settings: off, low, med. (medium),
high, escalate, and vibration.
3
Push
to enter the new setting.
The standby display reappears.
If you turn off the ringer volume
The message -Ringer Off- is displayed at the top of the screen when the standby
display appears.
Tips
• While the phone is ringing, turn down to lower the ringer volume for that call.
• If you set the ringer volume to escalate, the telephone rings twice at a low volume,
then once at medium volume, and thereafter at a high volume.
• If you set the ringer volume to vibration, the telephone emits a vibration instead of an
audible ring.
• If the telephone is used with a hands-free car kit or charging accessory, the vibration
setting is not available.
Muting/unmuting the microphone [F22]
You can mute/unmute the phone during a call directly, without using the Sounds
menu by pushing and holding
microphone during a call using the Sounds menu. This feature is available only
during a call.
1
During a call, turn
push
.
The Sounds menu appears.
2
Push
to select Mute/UnMute.
Now the microphone is muted.
3
To unmute the microphone, push
The Sounds menu reappears.
4
Push
to select Mute/UnMute.
Now the microphone is unmuted.
5.1_CM_Z200
. In addition, you can mute/unmute the
to select Sounds from the Features menu, then
.
7
5.7
6/8/98, 9:28 AM
Advertisement
Table of Contents
