Sony D-WAVE Zuma CM Z200 Operating Instructions Manual page 37

To save the callback number
1
After reading a message, push
The Options menu appears.
2
Turn to select Save Number, then push
A message appears, prompting you for a name to accompany the number.
3
Use the number buttons to enter the name.
If you press the same button in quick succession, the letter you just entered
changes. (See the "Alphanumeric table" on page XX.) Use
move the cursor and to insert spaces between characters. If you enter the
wrong character, press
4
When you are finished, push
name.
A confirmation message appears.
5
Push to store the new number in the first available memory
location.
If you want to store it in another location, turn
location, then push
status of the Phone Book.
To erase a text message
1
After reading a text message, push
The Options menu appears.
2
Turn to select Erase Msg, then push
The message is erased.
Erasing old text messages [F14]
1
Turn down to select Erase Old from the Message menu, then
–
push .
The Erase Old menu appears.
2
Press to erase old messages.
1
All unlocked old messages are erased. To go back to the Message menu
without erasing the messages, push
be indicated on the Message menu.
Tip
To erase a locked message, select Erase Msg from the Options menu of that message.
5.6
5.1_CM_Z200
.
.
to clear the character highlighted by the cursor.
CLR
to store the phone number and
. A confirmation message appears, followed by the
.
.
. If you erase all old messages, it will
6
/ or to
to select the desired
6/8/98, 9:28 AM