Table of Contents
Advertisement
Security
You can restrict unauthorized access to your phone and the information it holds.
Also, on the Security menu, you can reset menu settings to default and store
emergency numbers. Unlike other items on the Features menu, accessing the
Security menu requires a lock code when you select it from the menu. A typical
default lock code is either the last four digits of your phone number or 0000.
Preventing others from using your phone [F61]
This option lets you set when the phone will be locked. When the phone is locked,
carrying out most operations requires entering the lock code; you can still answer
incoming calls and dial 911 or other stored emergency numbers.
1
Push
to select Lock Phone from the Security menu.
The Lock Phone menu appears.
2
Turn
to select when the phone will be locked.
You can select never, on power-up, or right now. If you select never, the
phone is available for use at any time without a lock code. If you select
on power-up, the phone is locked every time you turn it on.
3
Push
to enter the new setting.
The standby display reappears. The message :Unlock indicates that the
phone is locked.
To unlock the phone
On the standby display, push
Setting a new lock code [F62]
The lock code must be entered every time you want to unlock the phone, and also
when you want to access restricted numbers.
1
Turn
to select New Code from the Security menu, then push
The Enter New Code display appears, prompting you to enter a new lock
code.
2
Use the number buttons to enter a lock code.
The lock code must be exactly four digits long.
3
Push
to store the new lock code in memory.
A confirmation display appears.
Note
Keep a record of your lock code. If you forget it, contact your service provider.
5.18
5.3_CM_Z200
. When prompted, enter the lock code.
18
.
6/8/98, 9:28 AM
Advertisement
Table of Contents
