Charging The Battery Pack - Sony D-WAVE Zuma CM Z200 Operating Instructions Manual

Charging the battery pack

Charge the battery before using the phone. A new battery is not fully charged. To
charge the battery, attach the battery pack to the phone, then connect the supplied
AC adapter.
Attaching the battery pack
1
Hook the battery pack onto the top of the
phone 1, and ease the battery pack down 2.
2
Snap the battery pack in place.
To remove the battery pack
1
Push the battery pack release tab upwards.
2 Lift up the bottom of the battery pack 1,
and pull it out 2.
2.4
2_CM_Z200 4 6/8/98, 9:27 AM