Table of Contents
Advertisement
Adjusting the keybeep volume [F23]
You can adjust the volume of the beep that sounds when you press a button.
1
Turn
to select Keybeep Vol from the Sounds menu, then push
The Keybeep Vol menu appears.
2
Turn
up to raise the keybeep volume, and down to lower it.
You can select from four keybeep volume settings: off, low, med.
(medium), and high.
3
Push
to enter the new setting.
The standby display reappears.
Adjusting the earpiece volume [F24]
You can adjust the earpiece volume during a call by turning
adjust the volume as follows:
1
Turn
to select Earpiece Vol from the Sounds menu, then push
The Earpiece Vol menu appears.
2
Turn
up to raise the earpiece volume, and down to lower it.
There are seven earpiece volume settings ranging from 1 to 7. A higher
number indicates higher volume.
3
Push
to enter the new setting.
The standby display reappears.
Setting the ringer type [F25]
You can set the type of beep that sounds for an incoming call.
1
Turn
to select Ringer Type from the Sounds menu, then push
The Ringer Type menu appears.
2
Turn
to select the ringer type.
You can select from five different ringer settings. The ringer sounds every
time you turn
3
Push
to enter the new setting.
The standby display reappears.
5.8
5.1_CM_Z200
.
8
.
. In addition, you can
.
.
6/8/98, 9:28 AM
Advertisement
Table of Contents
