Table of Contents
Advertisement
Extras
On the Extras menu, you can set the phone to enable touch dialing, redial
automatically, and answer incoming calls automatically or at the press of any button.
Also, you can use this menu to lock the keypad and to jot down phone numbers.
Preventing accidental operation [F51]
When the microphone is closed, you can lock the keypad by pushing and holding
from the standby display. You can also lock the keypad from the Features menu, as
described below. Locking the keypad offers low-level security. For example, it
disables accidental dialing when you keep the phone in your pocket.
1
Turn
to select Key Guard from the Extras menu.
The Key Guard menu appears.
2
Push
.
A message appears, confirming that the keypad is locked. After a few
seconds, the standby display reappears. The keypad lock icon ( ) and the
text Keyguard On indicates that the keypad is locked.
To unlock the keypad
1
Press
,
and
1
2
ABC
To unlock the keypad temporarily
1
Open the arm microphone.
The keypad becomes unlocked.
2
Close the arm microphone.
The keypad is locked again.
To answer an incoming call when the keypad is locked
Just open the arm microphone.
Tip
The backlight and keybeeps are turned off when the keypad is locked.
Activating touch dialing [F52]
If you want to use the touch dialing feature (see page XX), set to on.
1
Turn
to select Touch Dial from the Extras menu, then push
The Touch Dial menu appears.
2
Turn
to select on or off.
3
Push
to enter the new setting.
The standby display reappears.
5.16
5.3_CM_Z200
in quick succession.
3
DEF
16
.
6/8/98, 9:28 AM
Advertisement
Table of Contents
