Unlock With An Enrolled User; Set Number Of Locks; Authorize Access To Locks; Delete One User / All Users - Securam ScanLogic Optical Operating Instructions Manual

Unlock by an administrator (ID 01 or ID 02). When the LCD screen shows "Select Menu",
Follow the steps on Pages 10—12 to set time delay.
27. Unlock with an enrolled user (Level 1 & 2)
Place an enrolled finger on the reader window and/or enter an enrolled code. Refer to
example on Page 3.
28. Set number of locks (Level 1 & 2)
Unlock by an administrator (ID 01 or ID 02) .When the LCD screen shows "Select Menu",
press "▲" or "▼" to select "Set number of locks" and follow the steps on Page 10.
29. Authorize access to locks (Level 1 & 2)
Follow the steps on page 10.
30. Delete one user / all users (Level 1 & 2)
Follow the steps on page 11-12.
31. Wrong entry penalty (Level 1 & 2)
Follow the steps on page 12.

32. System info.

Press "Menu/OK". The screen will show "Select Menu". Press "▲" or "▼" to select
"System INFO."
Press "Menu/OK" and the LCD will show:
This indicates that up to 30 users can be enrolled in the EntryPad and there is no user
enrolled currently. The EntryPad firmware version is V9.82110909-27.
SecuRam Systems Inc. Page 15