Authorize Access To Locks - Securam ScanLogic Optical Operating Instructions Manual

lock will open directly.
Note: If Security Level is changed or system is recovered, the number of locks will
remain.
16. Authorize access to locks (Level 3)
Unlock with an administrator's fingerprint (ID No. 01 or 02). When the LCD screen shows
"Select Menu", press "▲" or "▼" to select "Authorize Locks".
Press "Menu/OK".
Press "▲" or "▼" to set the first ID in the group of users to be authorized. Press
"Menu/OK".
Press "▲" or "▼" to set the last ID in the group the users to be authorized. For example,
to authorize users with ID No. from 03 to 05, press "Menu/OK".
"Lock 1234" indicates the number of the available locks.
"Auth. oxxx" indicates which lock(s) have been authorized to open by
the group. Letter "o" means the group is authorized to open the lock.
Letter "x" means the group is not authorized.
When one letter flashes, press "▲" or "▼" to set "o" or "x".
If you set this option incorrectly, press the "Back" button, the left letter will flash again and
it can be reset.
Note: Administrators (ID No. 01 and 02) can open all locks.
For example, to authorize users with ID No. 03, 04 and 05 to be able to open only Lock 2:
When the LCD screen shows:
The first letter "x" is flashing. Press "▲" or "▼" to toggle this letter to "x". Press
"Menu/OK".
The second letter will flash. Press "▲" or "▼" to toggle this letter to "o". Press "Menu/OK".
Press "Menu/OK" twice to confirm the condition of Lock 3 and 4.
SecuRam Systems Inc. Page 11