Table of Contents
Advertisement
Huskvarna, 2018-03-12
Safety and Operating Instructions
Dear customer,
thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it.
Please note that the enclosed manual contains Atlas Copco references.
The Husqvarna Group is vouching for the quality of this product.
If you have any questions, please do not hesitate to contact our local sales or service point.
Husqvarna AB
561 82 Huskvarna, Sweden
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Atlas Copco AX28E
Summary of Contents for Atlas Copco AX28E
- Page 1 Dear customer, thank you for choosing a Husqvarna quality product. We hope that you will genuinely enjoy it. Please note that the enclosed manual contains Atlas Copco references. The Husqvarna Group is vouching for the quality of this product. If you have any questions, please do not hesitate to contact our local sales or service point.
- Page 2 36, 40, 48, 56, 65, 90, 28E Safety and operating instructions Electric poker vibrators © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions...
-
Page 4: Table Of Contents
Operating hose AX28E, AX48E and AX56E........ -
Page 6: Introduction
Safety and operating instructions Introduction Thank you for choosing a product from Atlas Copco. Since 1873, we have been committed to finding new and better ways of fulfilling our customers' needs. Through the years, we have developed innovative and ergonomic product designs that have helped customers improve and rationalize their daily work. -
Page 7: Safety Instructions
Always make sure that the electrical cable is kept ► Maintain adequate lighting in the working area. ► away from water, oil and sharp edges. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 8: Personal Safety
The respiratory protection must be effective for the type of substance at issue (and if applicable, approved by relevant governmental authority). © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 9: Operating, Precautions
Use the correct machine for the work that is going to be performed. Do not force the machine while operating. ► Take the working conditions into account. ► © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 10: Maintenance, Precautions
This information can be found at the end of these Safety and operating instructions. Storage ♦ Keep the machine in a safe place, out of the reach of children and locked up. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 11: Overview
To stop the vibration, switch off the poker vibrator and then the converter or generator. Vibrating NOTICE The AX28E is intended for laboratory use only. Do not use for work site application. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 12: When Taking A Break
♦ Switch off the power supply in the event of a longer break or when leaving the workplace. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 13: Disassemble The Vibrating Head
6. Unscrew the nipple (J) (right hand thread). 638™ Screw LOCTITE® 243™ LOCTITE®243™, LOCTITE®638™ are registered trademarks of Henkel Corporation. 243, 638 are trademarks of Henkel Corporation. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 14: Vibrating Element Ax36 - Ax65
4. Slide the rotor (K) and the stator (L) through the bearing (K) can be removed after the eccentrics tube (N). have been removed. Assembly Assembly © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 15: Operating Hose Ax36 And Ax40
2. Use compressed air to blow a cord into the hose from the switch box side. 3. Attach the cord to the wire harness and draw the harness into the hose. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 16: Storage
Always store the machine in a dry place. ♦ Keep the machine in a safe place, out of the reach ♦ of children and locked up. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 17: Troubleshooting
Use of a 60 Hz converter in a 50 Check the data plate on the Use an adapted converter. Hz network. converter. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 18: Technical Data
(49.2) (49.2) (49.2) Plug NOTICE The information is only a general description, it is not guaranteed and it contains no warranties of any kind. © 2013 Atlas Copco Construction Tools AB | No. 9800 1175 01b | 2013-04-29 Original instructions... -
Page 19: Weights And Dimensions Ax28E-Ax90
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have no control. -
Page 20: Ec Declaration Of Conformity
EC Declaration of Conformity EC Declaration of Conformity We, Atlas Copco Construction Tools AB, hereby declare that the machines listed below conform to the provisions of EC Directive 2006/42/EC (Machinery Directive), 2006/95/EC (Low voltage), 2004/108/EC (EMC) and the harmonised standards mentioned below. - Page 25 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. www.atlascopco.com...
Need help?
Do you have a question about the AX28E and is the answer not in the manual?
Questions and answers