FUNCTIONAL DESCRIPTION
The AG362 low pressure air atomising spray guns are designed to be fast changeover, modular
construction applicators, for spray finishing on machines and fixed mountings.
The AG362 can be mounted on either a rear entry, lever operated, fast detachable manifold, or a
screw attached, low profile manifold, dependant on the part number selected and mounting
preference.
The AG362 is intended for most types of general industrial coating and fine finishing operations,
suitable for both water based and solvent based applications.
Guns are available with a range of Conventional, Trans-Tech (High Efficiency) and HVLP atomisation
air caps, to give a choice of atomisation and Transfer Efficiency parameters.
The gun is designed as a flexible solution for the modern coating applicator, with multiple accessories
available, to further optimise the process.
SPECIFICATIONS
FLUID AND AIR INLET PRESSURES
Max Air Input Pressure
P1=
P2=
Max Fluid Input Pressure
Cylinder Air Pressure
P3=
ENVIRONMENTAL
Max Ambient Operating Temperature
MATERIALS OF CONSTRUCTION
Gun Head and Fluid Passageways
Gun Body Material
Air Cap Material
Fluid Tip and Needle Construction
Seals and O-Rings
MANIFOLD CONNECTIONS
Air Inlet Size
P1=
Fluid Inlet Size
P2=
Cylinder Inlet
P3=
WEIGHT WITH MANIFOLD
WEIGHT
DIMENSIONS WITH MANIFOLD
L x H x W mm
SB-E-2-643 R5.0
7 Bar [102 psi]
7 Bar [102 psi]
4 - 7 Bar [58 psi - 102 psi]
40°C Nominal [104°F]
Stainless Steel
Quickclean™ Coated Aluminium
Electroless Nickel Plated Brass
Stainless Steel
Nitride Coated Stainless Steel
HDPE, Viton Extreme
LEVER TYPE
1/8" G
1/8" G
1/8" G
LEVER TYPE
940g
LEVER TYPE
127 x 97 x 44
2/28
EN
SCREW TYPE
1/4" G
1/4" NPS
1/8" G
SCREW TYPE
850g
SCREW TYPE
127 x 64 x 89