Hunter RAIN CLIK WR-CLIK Owner's Manual And Installation Instructions page 14

ADJUSTMENTS AND OPERATION (continued) ...................
1.. Prior.to.applying.power.(yellow.wires).to.
the.receiver,.press.and.hold.the.bypass.
button.on.the.receiver.
2.. While.the.bypass.button.is.depressed,.
apply.power.to.the.receiver..The.sensor.
status.indicator.light.should.light.up.
yellow.indicating.that.the.receiver.is.ready.
to.learn.a.new.address.
3.. Press.and.hold.the.quick.response.button.
on.the.transmitter.
4.. Within.4.seconds,.the.receiver's.sensor.
status.indicator.light.should.turn.red..
The.receiver.has.now.learned.the.address.
and.it.will.be.retained.even.in.the.event.of.a.
power.outage.
5.. Release.the.button.on.the.transmitter..
The.sensor.status.indicator.light.should.
turn.green.
14
Battery Life
The.Wireless.Rain-Clik
designed.to.operate.up.to.ten.years.with.
it's.sealed,.maintenance-free.battery..The.
transmitter.is.available.as.a.replacement.part..
(WRC-TR).Should.you.need.to.change.the.
transmitter,.the.receiver.will.have.to.learn.the.
new.transmitter.address.
To check the status of the battery in
the transmitter:
1.. Press.and.hold.the.quick.response.
spindle.at.the.top.of.the.sensor.
.transmitter.is.
™
LED Light