Hunter RAIN CLIK WR-CLIK Owner's Manual And Installation Instructions page 13

Bypassing the Sensor
The.sensor.may.be.bypassed.by.using.the.
built.in.bypass.feature.on.the.receiver..To.
bypass.the.sensor,.press.the.SENSOR.BYPASS.
button.on.the.receiver..The.bypass.status.light.
will.turn.red.when.the.sensor.is.bypassed..
Pressing.the.SENSOR.BYPASS.button.again.
will.re-enable.the.sensor.and.the.sensor.
bypass.light.will.go.out.
Setting the Transmitter Address at
the Receiver
Note:
Units.purchased.as.a.kit.will.already.
have.their.communication.address.preset..
No.addressing.is.necessary,.however,.if.the.
receiver.or.transmitter.is.replaced.you.need.
to.reset.the.address.
Each.transmitter.is.produced.with.a.unique.
address..A.receiver.must.learn.this.address.to.
work.with.that.transmitter..This.step.is.only.
necessary.if.transmitters.and.receivers.are.
purchased.separately.
13