MOUNTING THE TRANSMITTER ..........................................
Standard Mounting
Using.the.screws.
provided.with.your.
sensor,.mount.the.
transmitter.on.any.
surface.where.it.
will.be.exposed.
to.unobstructed.
rainfall,.but.not.
in.the.path.of.
sprinkler.spray..
The.sensor.should.
be.oriented.upright.
(as.pictured),.but.the.swivel.bracket.can.be.moved.
for.mounting.on.any.angled.surface..Loosen.the.
locknut.and.screw.before.swiveling.the.bracket,.and.
then.re-tighten..
10
Standard Mount
Gutter Mounting (Optional)
The.sensor.gutter.
mount.can.be.
purchased.as.an.
optional.accessory.
for.your.Wireless.
Rain-Clik
.(order.
™
p/n.SGM)..The.
SGM.allows.the.
transmitter.to.be.
mounted.directly.
to.the.edge.of.
a.gutter..Install.
the.SGM.on.the.transmitter.by.removing.the.
metal.extension.arm.supplied.with.your.sensor.
and.reinstalling.the.SGM..Position.the.gutter.
mount.on.the.edge.of.the.gutter.and.twist.the.
thumbscrew.to.secure.it.in.place.
SGM
Gutter Mount