Back Bar Service Manual
STEP 3.
Remove top and bottom hinge brackets. Retain
screws for later use. See Figure 8-2.
Figure 8-2. Hinge Removal
STEP 4.
Remove hole plugs from top and bottom hinge
bracket mounting holes. See Figure 8-2.
Place plugs in holes on opposite side made
vacant by removing hinges in step 3.
Return to
Table of Contents
Service Instructions - Door, Drawers, and Shelving
STEP 5.
Using screws removed in step 3, install top and
bottom hinge brackets from kit. See Figure 8-3.
Figure 8-3. Hinge Installation
STEP 6.
Remove top and bottom hinge brackets from
door (Figure 8-4). Retain screws for later use.
Figure 8-4. Door Brackets
Page 8-2