Reading Parameters; Good Read Green Spot Duration - Wasp WWS750 Quick Reference Manual

2d duraline wireless scanner

Hide thumbs Also See for WWS750:

Table of Contents

Reading Parameters

Move the reader toward the target and center the aiming

pattern and illumination system to capture and decode

the image. See

Using the Wasp WWS750 on page 2

for

more information.

The aiming system will briefly switch off after the acquisi-

tion time, and if no code is decoded will switch on again

before the next acquisition. The illuminator will remain on

until the symbol is decoded.

As you read code symbols, adjust the distance at which

you are holding the reader.

Successful reading can be signaled by a good read green

spot. Use the bar codes that follow to specify the duration

of the good read pointer beam after a good read.

ENTER/EXIT PROGRAMMING MODE

Short (300 ms)

Disabled

Medium (500 ms)

Long (800 ms)

Quick Reference Guide

Table of Contents

Show Quick Links

Table of Contents