Assembly Instructions - Body Flex Sports Body Rider 35 Owner's Manual

assembly instructions

S T E P 1
With the help of an assistant, attach the Rear Stabilizer (#53)
to the Bottom Connection Joint (#41). Insert two Carriage
Bolts (#51) through the Rear Stabilizer (#53) followed by the
Bottom Connection Joint (#41). Secure them together using
two Arc Washers (#11) and two Nuts (#19).
Attach the Bottom Connection Joint (#41) to the rear of the
Main Frame (#23). Insert four Bolts (#9) through four Spring
Washers (#10), four Washers (#44) followed by the Bottom
Connection Joint (#41) and Main Frame (#23) from the side.
Then insert two Bolts (#29) through two Spring Washers
(#10), two Washers (#44) followed by the Bottom
Connection Joint (#41) and Main Frame (#23) from the top
as illustrated.
IMPORTANT NOTE: Please do not be alarmed by the two (2)
Parallel Curve-Cranks™ that are already pre-installed and
correctly oriented as shown in exploded diagram below. This
may look different from traditional exercise bike configurations
and is one of the many unique features of your Body Rider 35
unit.
23
Page 6
29
10
44
10
44
41
44
10
19
9
11
P A R T S
9
19
53
11
51
#44 #11
x6 x2
#51
#29
x2 x2
Parallel Curve-Cranks™
correctly pre-installed
23
#10
x6
#9
x4
HBR35