Troubleshoot Support - Body Flex Sports Body Rider 35 Owner's Manual

H a n d P u l s e s i g n a l
If the computer is not picking up your hand pulse signal (or you are getting inaccurate readings), please adjust the
following:
1. Slightly moisten/dampen the palms with water so the sensors can detect a pulse signal.
2. Do not grip the sensors too tightly. Only moderate pressure need be applied.
Gripping the sensors too tightly restricts and seizes detection of your pulse.
3. Remove any rings or jewelry to prevent interference.
4. Check to ensure all pulse sensor wires are properly connected and are not damaged.
You may need to refer to installation/assembly directions for the pulse sensor wires in this manual.
C A l o r i e s / d i s t a n c e / t i m e / e t c ,
If the computer is not displaying the CALORIES/DISTANCE/TIME/(ETC.) functions (or you are getting inaccurate
readings), please adjust the following:
1. Check to ensure all computer sensor wires are properly connected and are not damaged. You may need to refer to
installation/assembly directions for the sensor wires in this manual.
c o m p u t e r d i s p l a y
If the computer display is blank & not displaying any data (or does not appear to power on), please adjust the following:
1. Check to ensure all sensor wires are all properly connected and are not damaged.
2. Check to ensure the EITHER the AC Adapter* is properly plugged in, OR, the Batteries* are fully charged.
If you are still having any troubleshooting issues, please contact our Customer Care Team for assistance.
*Please check your product manual to determine if your model uses EITHER 1. an AC Adapter, OR 2. Batteries to power your
unit.
For your safety, please do not discard this Troubleshooting sheet or the Owner's Manual,
and keep them in a place where you can easily access/refer to them at any time.
If you are still having any troubleshooting issues, please contact our Customer Care Team for assistance.
Page 21

Troubleshoot support

HBR35