Page 1
Chemker 410 Chemical Resistant Vacuum Pump...
Page 3
In case of any damage with the pump, please directly contact local distributor or us for service. Do not repair it by yourself to avoid hazard. Unpacking When unpacking, notice if the pump is in good situation. If not, please contact the distributor or contact us by e-mail: export@rocker.com.tw immediately for assistance.
Page 4
Main Part Diagram Position Designation Air inlet Air outlet On/Off switch...
Page 5
Vapor trap / vacuum regulator is an optional item used to adjust vacuum and absorb moisture and particle. Please setup "glass" vapor trap / vacuum regulator if operate with corrosive gases. Chemker 410, setup (glass) vapor trap / vacuum regulator Remove the Teflon tier connector at side of cylinder head...
Page 6
Fix the moisture trap at the location of the Teflon tier connector removed from Step 1. Fix the glass bottle. Finished Ordering Information 169410-11 Chemker 410 Vacuum pump, AC110V/60Hz 169410-22 Chemker 410 Vacuum pump, AC220V/50Hz 169300-06 Vapor trap / vacuum regulator...
Need help?
Do you have a question about the Chemker 410 and is the answer not in the manual?
Questions and answers