Page 1
Instruction Manual Rocker 300C / 400C / 410C PTFE Coated Chemical Resistant Vacuum Pump Please read this instruction manual before using this product.
Page 2
* Warning: The PTFE-coated diaphragm and chamber can o er good resistance to a wide range of chemicals except strong acid and alkali. Unpacking When unpacking, notice if the pump is in good situation. If not, please contact the distributor or contact us by e-mail: export@rocker.com.tw immediately for assistance.
Page 3
Rocker 300C Main Part Diagram Model Position Designation On/Off Switch Air Outlet Air Inlet Rocker 300C Vacuum Gauge Vacuum Regulator Moisture Trap...
Page 4
Rocker 400C Main Part Diagram Model Position Designation On/Off Switch Air Outlet Air Inlet Rocker 400C Vacuum Gauge Vacuum Regulator Moisture Trap...
Page 5
Rocker 410C Main Part Diagram Model Position Designation On/Off Switch Air Outlet Air Inlet Rocker 410C Vacuum Gauge Vacuum Regulator Moisture Trap...
Page 6
Operation Operating procedure 1. Press on/off (1) button to activate the pump after making sure all tubing are well connected. 2. To setup vacuum by adjusting the regulator (5). * Warning: When pump is used for aqueous solution ltration, please ensure the liquid level of ask not exceed safety level.
Need help?
Do you have a question about the 300C and is the answer not in the manual?
Questions and answers