Page 2
Important Notice This instrument is designed for laboratory usage only. Please read this manual carefully before installing and operating. The instrument shall not be modified in any way. Any modification will void the warranty and may result in potential hazard. We are not responsible for any injury or damage caused by any non-intended purposes and modifying the instrument without authorization.
Page 3
Unpacking Please check if the package is complete without any damage before unpacking. When unpacking, please make sure you have all accessories that indicated on the list. If there is any problem, please keep the serial number along with packing case and contact your local distributor immediately for assistance.
Page 4
Operation Filling and Re lling of Lubricant NOTE. The pump is delivered without lubricant, please ll lubricant before rst use. A. Remove cap of oil inlet (3) and fill in Tanker SC lubricant (187100-05) slowly to “Max” mark by watching on oil level window (5). Do NOT exceed the Max.
Page 5
D. Press power switch (1) to activate the pump after making sure all tubing are well connected. Lubricant may higher than Max. mark when operation because the temperature will inflate the ● volume of lubricant. Make sure to shut air inlet (2) before starting the pump. ●...
Page 6
Troubleshooting Problem Reason and Solution Loose plug Reconnect plug to power supply. ● Failed to start Improper input voltage Connect to right power supply. ● Switch is broken Contact distributor for assistance. ● Aging lubricant Change the new lubricant by following “How to ●...
Need help?
Do you have a question about the Tanker 130 and is the answer not in the manual?
Questions and answers