Advertisement
Instructions for the General Store #GS
The Churn and Handle
Sand the edges of the Churn to bevel the top and bottom
Paint the Churn
Cut a narrow strip from the long edge of a sheet of paper.
Darken the strip with a magic marker.
Smear glue on one surface of the paper and wrap it around the
Churn to form bands - one layer thick plus a good overlap, make
several bands.
Put a band on the top of the churn handle too.
Decorate the Sign with colored markers.
Glue the Sign to the Top Front, centered.
You're done with the General Store Kit, but the project just starts here. Miniatures for your General Store are
everywhere... a bottle cap up-side-down is a pie plate, a postage stamp or a printed picture from your computer is
a poster, glass beads are penny candy. Keep your eyes open and your imagination honed; the fun goes on and on.
Page 14
Advertisement
