Advertisement
Instructions for kit #HB 1900
□
4B Center Postbases:
(1) Lay two Postbase Fronts fl at, glue and tape two Post-
base Sides to each, lined up on the edges
(2) Glue and tape a Postbase Back to each assembly.
(3) Line up the edges and ends, with extra
attention to the edges in the cutout
□
4C End Postbases
(1) Lay two Postbase Fronts fl at, glue and tape one Post-
base Side to each, lined up on opposite edges to make
one left set and one right set
(2) Glue and tape a Postbase Side End to each assembly.
(3) Glue and tape the Postbase BackEnd to the back
edge of the Postbase Sides 4C (3)
(4) Line up the edges and ends with extra attention to the
edges in the cutout.
4C (3) Left Set viewed from the bottom
Right set is the mirror
BackEnd
Side
Postbase Back
4B (3) up-side-down
Line up the parts in
the cutout
4C (2)
Left set
SideEnd
Front
Postbase Side
4B (2)
Postbase Front
Postbase Side
Postbase Front
Porch Posts page 7
4B (1)
Two Sets
Lined up
4C (1)
Left and Right Sets
are mirrors of each other
Advertisement
