Advertisement
Instructions for kit #HB 1900
□
18. Glue and tape the Roofs to the house, centered side to
side (1" overhang).
Let the glue dry.
□
19. Glue and tape the Dormer Sides to the Dormer Front.
The Cricket Roofs are smaller than the Handy Squares, and
easy to use as squares here.
Let the glue dry.
Dormer Side
Lined up on top
□
20. Glue and tape the Attic Dividers into
the attic, lined up with the cutout, straight and
square.
Let the glue dry.
□
21. Glue and tape the Dormer to the house, lined up on the inside.
□
21B. Cut Dormer Vertical Trim from the Vertical Strip-
3
13
wood (
/
x
/
). Cut the Side Trim fi rst, then the Front
32
32
Trim. Leave a gap at the bottom for shingles (2 thicknesses of
shingles) so you won't have to cut the shingles to go around the
Trim
Glue and tape the Trim in place
Porch Roof
Front Roof
Porch Roof
Front Roof
Rear Roof and Eave
Lined up at the bottom
Attic Dividers
Line up with the edge
Dormer Vertical Trim
page 16
Advertisement
