Advertisement
8
9.
Position shelf end template onto tower side.
10. Align template line with adjacent wall line.
11. Level template.
12. Mark required Shelf End position for required depth (12in. or 16in. depth).
13. Secure using #8 - 3/4in. screws.
9
10
13
14. The long hang is created by cutting the 24 in. shelf & bar to 21 3/4 in. wide.
15. Double check required shelf measurement.
16. Cut Shelf to required width.
17. Cut bar to required width.
14
16
8
11
12
15
17
18. On the pilot hole side of the bar, measure in 4 in. from the end.
19. Mark location & repeat for other end.
20. Align side of bar spacer with the mark.
21. Secure with #8 1in. screw.
22. Repeat at each marked location.
18
19
21
23. Place notched bar spacer / bar tight on inside rail of shelf.
24. Flush bar & shelf.
25. Secure bar spacer to shelf rail with #8 1 in. screw.
26. Repeat at each bar spacer location.
23
24
27. Place shelf into shelf end hardware & onto L-clip hardware.
28. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
27
28
20
25
28
8
Advertisement
