Advertisement
14. Plumb level tower side.
15. Mark tower bracket hole locations on wall.
16. Remove shelf and tower.
17. Align shelf end hardware with the mark on the tower & mark screw hole
locations.
18. Secure shelf end to tower top using #8 1/2in. screws at hole locations.
NOTE: If shelf is mounted level with the tower top, the shelf end hardware
should be "centered" on the end of the front rail of the tower top.
14
16
19. Install wall anchors at tower bracket locations if no stud is present.
20. Place tower onto wall and align with hole locations.
21. Place shelf onto wall hardware.
22. Secure tower to wall using #8 1 1/2in. screws at all bracket locations.
23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations
19
22
23
15
17
18
20
21
23
STEP 6 - Installing Lower Shelf
On the lower level line space shelf mounting L-clip hardware equidistant in
the following manner:
•
3 L-clip hardware within the 48in. shelf location
1.
Center the top screw hole of the shelf mounting L-clip hardware with the
level line & mark all hole locations.
2.
Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wall
anchors provided if no stud is present).
3.
Repeat for remaining L-clip locations.
1
2
4.
Position shelf end template onto side wall.
5.
Align template line with adjacent wall line.
6.
Level template.
7.
Mark required Shelf End position for required depth (12in. or 16in. depth).
8.
Secure Shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud is
present).
4
6
2
3
5
7
6
Advertisement
