Installing The Inner Rails On The Chassis - NEC SX-Aurora TSUBA300-8ASA User Manual

SX-Aurora TSUBASA A300-8 User's Guide
Warning: do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Note: The figure above is for illustrative purposes only. Always install servers at the bottom
of the rack first.

Installing the Inner Rails on the Chassis

Installing the Inner Rails
1. Identify the left and right side inner rails. Place the correct inner rail on the side of the
chassis, aligning the hooks of the chassis with the inner rail holes. Make sure the rail
faces "outward" so that it will fit with the rack's mounting bracket.
2. Slide the rail toward the front of the chassis to hook the inner rail onto the side of the
chassis.
3. If desired, secure the rail with two flat head M4 x 4mm screws as illustrated.
4. Repeat for the other inner rail.
4
Figure 2-2. Installing the Inner Rails
19
1
3
1
3
2
2
1