Technical Assistance - TECNOEKA EKF423DUD Use And Instruction Manual

Electric Ovens rev. 15_____________________________________________________________________DIGITAL LINE
"ER1" appears on the
display
(for ovens predisposed)
Core temperature
activated (led on to the
symbol ) and probe
connected to the control
panel: the message
"- - - " appears on the
display

23. Technical assistance

Before leaving the factory, the appliance was completely regulated and tested by expert specialised
personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving details
of the problem, the appliance model and the serial number (on the rating plate on the rear panel).
For any maintenance the user can contact Tecnoeka by calling the telephone numbers on the
cover or going to www.tecnoeka.com..
24. Informations to the consumers
Further to Directive 2012/19/UE, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be
disposed of separately from the other rubbish. The user must hand the
appliance to a specialised waste collection centre for electric and electronic
equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help to
produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish.
Should the user dispose of the product abusively, administrative sanctions would be applied
pursuant.
________________________________________________________________________________________ page. 15
- Breaking in the connection between the
cooking chamber probe (electronic card) and
the control panel
- Damaged cooking chamber probe
- Break in the connection between the core
probe – electronic (power) card
- Damaged core needle probe
- Check the connection to the
control panel
- Contact a qualified technician to
repair the probe
- Check the connection to the
electronic card
- Contact a qualified technician to
repair the probe