Saturn 2009 OUTLOOK Owner's Manual page 142

Saturn 2009 outlook automobile owner manuals
Table of Contents

Advertisement

3-20
Instrument Panel
6
(Floor): Air is directed to the
floor outlets, with some of the air
directed to the windshield, side
window, and second row floor
outlets. In this mode, the system
automatically selects outside air.
Recirculation cannot be selected
while in floor mode.
-
(Defog): This mode clears the
windows of fog or moisture. Air is
directed to the windshield, floor
outlets, and side window vents.
When this mode is selected, the
system turns off recirculation and
runs the air conditioning unless the
outside temperature is less than
40°F (4°C). Recirculation cannot be
selected while in the defog mode.
Do not drive the vehicle until all the
windows are clear.
0
(Defrost): This mode quickly
clears the windshield of fog or frost.
Air is directed to the windshield
and side window vents, with some
to the floor vents. In this mode,
outside air is pulled inside the
vehicle. Recirculation cannot be
selected while in the defrost mode.
The air conditioning system runs
automatically in this setting, unless
the outside temperature is less
than 40°F (4°C). Do not drive
the vehicle until all the windows
are clear.
#
(Air Conditioning): Press to
turn the air conditioning system on
or off. An indicator light comes on
when A/C is on. The air conditioning
system does not operate when
the outside temperature is below
40°F (4°C). The indicator light
flashes three times and turns off
when outside conditions affect
air conditioning operation.
This is normal.
For quicker cool down on hot days:
1. Open the windows to let hot
air escape.
H
2. Select
mode.
#
3. Select
.
4. Select the coolest temperature.
5. Select the highest fan speed.
6. Close the windows after the hot
air has escaped.
7. Once the vehicle's interior
temperature is below the outside
@
temperature, select
for faster cooling.
Using recirculation for long periods
of time could cause the air inside
of the vehicle to become too dry.
To prevent this from happening, after
the inside of the vehicle has cooled,
turn the recirculation mode off.
mode

Advertisement

Table of Contents
loading

Table of Contents