Saturn 2007 Aura Owner's Manual

Saturn 2007 Aura Owner's Manual

Saturn 2007 aura automobile owner's manual
Hide thumbs Also See for 2007 Aura:
Table of Contents

Advertisement

2007 Saturn AURA Owner Manual
Seats and Restraint Systems ....................... 7
Front Seats
.............................................. 9
Rear Seats
............................................. 16
Safety Belts
............................................ 18
Child Restraints
Airbag System
........................................ 69
Restraint System Check
Features and Controls ................................ 91
Keys
....................................................... 93
Doors and Locks
Windows
............................................... 108
Theft-Deterrent Systems
Starting and Operating Your Vehicle
Mirrors
.................................................. 132
®
OnStar
System
...................................... 40
......................... 88
.................................. 102
....................... 112
..... 116
................................... 135
Universal Home Remote System
Storage Areas
...................................... 152
Sunroof
................................................ 154
Instrument Panel ....................................... 157
Instrument Panel Overview
Climate Controls
Warning Lights, Gages,
and Indicators
Driver Information Center (DIC)
Audio System(s)
Driving Your Vehicle ................................. 245
Your Driving, the Road,
and Your Vehicle
Towing
................................................. 284
M
.......... 139
................... 160
................................... 177
................................... 187
............ 204
................................... 217
.............................. 246
1

Advertisement

Table of Contents
loading

Summary of Contents for Saturn 2007 Aura

  • Page 1 2007 Saturn AURA Owner Manual Seats and Restraint Systems ... 7 Front Seats ... 9 Rear Seats ... 16 Safety Belts ... 18 Child Restraints ... 40 Airbag System ... 69 Restraint System Check Features and Controls ... 91 Keys ...
  • Page 2 Service and Appearance Care ... 295 Service ... 297 Fuel ... 299 Checking Things Under the Hood Bulb Replacement ... 344 Windshield Wiper Blade Replacement Tires ... 348 Appearance Care ... 382 Vehicle Identification ... 390 Electrical System ... 391 Capacities and Specifications Maintenance Schedule ...
  • Page 3: Canadian Owners

    SATURN and the SATURN Emblem are registered trademarks, and the name AURA is a trademark of Saturn Corporation. GENERAL MOTORS and GM are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
  • Page 4: How To Use This Manual

    How to Use This Manual Many people read the owner manual from beginning to end when they first receive their new vehicle to learn about the vehicle’s features and controls. Pictures and words work together to explain things. Index A good place to quickly locate information about the vehicle is the Index in the back of the manual.
  • Page 5: Vehicle Symbols

    Vehicle Damage Warnings You will also find notices in this manual. Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly.
  • Page 6 These are some examples of symbols that may be found on the vehicle:...
  • Page 7: Table Of Contents

    Section 1 Front Seats ... 9 Manual Seats ... 9 Power Seats ... 10 Manual Lumbar ... 10 Heated Seats ... 11 Reclining Seatbacks ... 12 Head Restraints ... 15 Power Lift Seat ... 16 Rear Seats ... 16 Split Folding Rear Seat ... 16 Safety Belts ...
  • Page 8 Section 1 Airbag System ... 69 Where Are the Airbags? ... 72 When Should an Airbag Inflate? ... 75 What Makes an Airbag Inflate? ... 77 How Does an Airbag Restrain? ... 78 What Will You See After an Airbag Inflates? ... 78 Passenger Sensing System ...
  • Page 9: Front Seats

    Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
  • Page 10: Power Seats

    Power Seats In vehicles with power seats, the controls used to operate them are located on the outboard side of the seat. To adjust the seat, do any of the following: • Move the seat forward or rearward by sliding the control forward or rearward.
  • Page 11: Heated Seats

    Heated Seats Your vehicle may have heated front seats. The buttons are located on the outboard side of the driver’s and front passenger’s seats. Press the top of the switch to turn the feature on. The seat will heat to the high setting.
  • Page 12: Reclining Seatbacks

    Reclining Seatbacks Manual Reclining Seatbacks CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
  • Page 13 To recline the seatback, do the following: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place. 3. Push and pull on the seatback to make sure it is locked.
  • Page 14 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries.
  • Page 15: Head Restraints

    Head Restraints Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. Pull the restraint up to raise it.
  • Page 16: Power Lift Seat

    Power Lift Seat To adjust a power lift seat up or down: 1. Move the seat forward or rearward to the desired position. 2. Press the top or bottom of the power lift seat switch, located on the outboard side of the driver’s seat, to raise or lower the seat.
  • Page 17 To lower the rear seatback, pull on the seat tab located on the outboard side of the seatback cushion and fold the seatback down. This allows you direct access to the trunk. To raise the rear seatback, follow these steps: 1.
  • Page 18: Safety Belts

    Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly.
  • Page 19 In most states and in all Canadian provinces, the law says to wear safety belts. Here is why: They work. You never know if you will be in a crash. If you do have a crash, you do not know if it will be a bad one.
  • Page 20 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
  • Page 21 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
  • Page 22: Questions And Answers About

    or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Will I be trapped in the vehicle after an...
  • Page 23: How To Wear Safety Belts Properly

    If I am a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you are in an accident — even one that is not your fault — you and your passengers can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers.
  • Page 24: Driver Position

    Driver Position Lap-Shoulder Belt The driver has a lap-shoulder belt. Here is how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index. 3.
  • Page 25 6. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants. The lap part of the belt should be worn low and snug on the hips, just touching the thighs.
  • Page 26 What is wrong with this? The shoulder belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
  • Page 27 CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
  • Page 28 What is wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.
  • Page 29 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
  • Page 30 What is wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your retailer to fix it.
  • Page 31: Shoulder Belt Height Adjustment

    To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
  • Page 32: Safety Belt Use During Pregnancy

    Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
  • Page 33: Rear Seat Passengers

    Rear Seat Passengers It is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash.
  • Page 34 When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again. If the belt is not long enough, see Safety Belt Extender on page 39. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
  • Page 35 The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there is a sudden stop or a crash. CAUTION: You can be seriously hurt if your shoulder belt is too loose.
  • Page 36: Rear Safety Belt Comfort Guides

    Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
  • Page 37 2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt and insert the two edges of the belt into the slots of the guide. 3. Be sure that the belt is not twisted and it lies flat.
  • Page 38 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 39: Safety Belt Pretensioners

    Safety Belt Pretensioners Your vehicle has safety belt pretensioners for the driver and right front passenger. Although you cannot see them, they are part of the safety belt assembly. They help tighten the safety belts during the early stages of a moderate to severe frontal and near frontal crash if the threshold conditions for pretensioner activation are met.
  • Page 40: Child Restraints

    Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
  • Page 41 CAUTION: Never do this. Here two children are wearing the same belt. The belt cannot properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.
  • Page 42 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
  • Page 43: Infants And Young Children

    Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
  • Page 44 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force on a person’s arms.
  • Page 45 CAUTION: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 46 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height, and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
  • Page 47: Child Restraint Systems

    CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
  • Page 48 A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
  • Page 49 A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. A booster seat can also help a child to see out the window.
  • Page 50 Securing an Add-on Child Restraint in the Vehicle CAUTION: A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Make sure the child restraint is properly installed in the vehicle using the vehicle’s safety belt or LATCH system, following the instructions that came with that restraint,...
  • Page 51 Securing the Child Within the Child Restraint There are several systems for securing the child within the child restraint. One system, the three-point harness, has straps that come down over each of the infant’s shoulders and buckle together at the crotch. The five-point harness system has two shoulder straps, two hip straps, and a crotch strap.
  • Page 52: Where To Put The Restraint

    Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that children be secured in a rear seat, including: an infant or a child riding in a rear-facing child restraint;...
  • Page 53 CAUTION: (Continued) under some unusual circumstance, even though it is turned off. We recommend that rear-facing child restraints be secured in a rear seat, even if the airbag(s) are off. If you need to secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go.
  • Page 54: Lower Anchors And Tethers For Children (Latch)

    Configurations for Use of Three Child Restraints A. Child restraint or occupant using safety belt A. Child restraint or occupant using safety belt B. Child restraint using LATCH Wherever you install a child restraint, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle.
  • Page 55 The following explains how to attach a child restraint with these attachments in your vehicle. Not all vehicle seating positions or child restraints have lower anchors and attachments or top tether anchors and attachments. Lower Anchors Lower anchors (A) are metal bars built into the vehicle.
  • Page 56 Some child restraints with top tethers are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. In the United States, some child restraints also have a top tether.
  • Page 57 To assist you in locating the lower anchors, each rear anchor position has a label, near the crease between the seatback and the seat cushion, showing where the anchors are located. The top tether anchors are located behind the rear seat on the filler panel.
  • Page 58 Securing a Child Restraint Designed for the LATCH System CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed.
  • Page 59 CAUTION: Children can be seriously injured or strangled if a shoulder belt is wrapped around their neck and the safety belt continues to tighten. Secure any unused safety belts behind the child restraint so children cannot reach them. Pull the shoulder belt all the way out of the retractor to set the lock, if your vehicle has one, after the child restraint has been...
  • Page 60 You cannot secure three child restraints using the LATCH anchors in the rear seat at the same time, but you can install two of them. If you want to do this, install one LATCH child restraint in the passenger-side position, and install the other one either in the driver-side position or in the center position.
  • Page 61 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2.
  • Page 62: Securing A Child Restraint In A Rear Seat Position

    If the position you are using has an adjustable head restraint and you are using a dual tether route the tether under the head restraint and in between the head restraint posts. See Head Restraints on page 15. 3. Push and pull the child restraint in different directions to be sure it is secure.
  • Page 63 3. Buckle the belt. Make sure the release button 4. Pull the rest of the shoulder belt all the way is positioned so you would be able to unbuckle out of the retractor to set the lock. the safety belt quickly if you ever had to.
  • Page 64: Securing A Child Restraint In The Right Front Seat Position

    5. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 65 In addition, your vehicle has a passenger sensing system. The passenger sensing system is designed to turn off the right front passenger’s frontal airbag and seat-mounted side impact airbag when an infant in a rear-facing infant seat or a small child in a forward-facing child restraint or booster seat is detected.
  • Page 66 There is no top tether anchor at the right front seating position. Do not secure a child seat in this position if a national or local law requires that the top tether be anchored or if the instructions that come with the child restraint say that the top tether must be anchored.
  • Page 67 4. Buckle the belt. Make sure the release button 5. Pull the rest of the shoulder belt all the way is positioned so you would be able to unbuckle out of the retractor to set the lock. the safety belt quickly if you ever had to.
  • Page 68 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
  • Page 69: Airbag System

    Airbag System Your vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front passenger. • A seat-mounted side impact airbag for the driver. • A seat-mounted side impact airbag for the right front passenger.
  • Page 70 CAUTION: Frontal airbags for the driver and right front passenger are designed to deploy in moderate to severe frontal and near frontal crashes. They are not designed to inflate in rollover, rear crashes, or in many side crashes. And, for some unrestrained occupants, frontal airbags may provide less protection in frontal crashes than more forceful airbags have provided in...
  • Page 71 CAUTION: Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 72: Where Are The Airbags

    Where Are the Airbags? The driver’s frontal airbag is in the middle of the steering wheel. The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side.
  • Page 73 The seat-mounted side impact airbag for the driver is in the side of the driver’s seatback closest to the door. The seat-mounted side impact airbag for the right front passenger is in the side of the passenger’s seatback closest to the door.
  • Page 74 The roof-mounted side impact airbag for the driver and the person seated directly behind the driver is in the ceiling above the side windows. The roof-mounted side impact airbag for the right front passenger and the person seated directly behind that passenger is in the ceiling above the side windows.
  • Page 75: When Should An Airbag Inflate

    CAUTION: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any...
  • Page 76 In addition, your vehicle has “dual stage” frontal airbags, which adjust the restraint according to crash severity. Your vehicle has electronic frontal sensors, which help the sensing system distinguish between a moderate frontal impact and a more severe frontal impact. For moderate frontal impacts, these airbags inflate at a level less than full deployment.
  • Page 77: What Makes An Airbag Inflate

    The side impact airbags are intended to inflate in moderate to severe side crashes. A side impact airbag will inflate if the crash severity is above the system’s designed “threshold level.” The threshold level can vary with specific vehicle design. Side impact airbags are not intended to inflate in frontal or near-frontal impacts, rollovers, or rear impacts.
  • Page 78: How Does An Airbag Restrain

    How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by safety belts.
  • Page 79 CAUTION: When an airbag inflates, there may be dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so.
  • Page 80: Passenger Sensing System

    Passenger Sensing System Your vehicle has a passenger sensing system for the right front passenger’s position. The passenger airbag status indicator will be visible when you start your vehicle in the instrument panel. United States The words ON and OFF, or the symbol for on and off, will be visible during the system check.
  • Page 81 A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to the rear-facing child is so great, if the airbag deploys. CAUTION: A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s airbag inflates.
  • Page 82 The passenger sensing system is designed to turn off the right front passenger’s frontal airbag and seat-mounted side impact airbag if: • The right front passenger seat is unoccupied. • The system determines that an infant is present in a rear-facing infant seat. •...
  • Page 83 If this happens, slightly recline the vehicle’s seatback and adjust the seat cushion if possible. Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, adjust the head restraint. See Head Restraints on page 15. Remove any additional material from the seat cushion before reinstalling or securing the child restraint.
  • Page 84 If a person of adult-size is sitting in the right front passenger’s seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, turn the vehicle off and ask the person to place the seatback in the fully upright position, then sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably extended.
  • Page 85 CAUTION: If the airbag readiness light in the instrument panel cluster ever comes on and stays on, it means that something may be wrong with the airbag system. If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of the airbag(s).
  • Page 86: Servicing Your Airbag-Equipped Vehicle

    Servicing Your Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places around your vehicle. You do not want the system to inflate while someone is working on your vehicle. Your retailer and the service manual have information about servicing your vehicle and the airbag system.
  • Page 87: Adding Equipment To Your Airbag-Equipped Vehicle

    Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to the front or sides of the vehicle that could keep the airbags from working properly? Yes. If you add things that change your vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
  • Page 88: Restraint System Check

    Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
  • Page 89: Replacing Restraint System Parts After A Crash

    Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as...
  • Page 90 ✍ NOTES...
  • Page 91: Features And Controls

    Section 2 Keys ... 93 Remote Keyless Entry (RKE) System ... 94 Remote Keyless Entry (RKE) System Operation ... 96 Doors and Locks ... 102 Door Locks ... 102 Power Door Locks ... 103 Door Ajar Reminder ... 103 Delayed Locking ... 103 Programmable Automatic Door Locks ...
  • Page 92 Section 2 ® OnStar System ... 135 Universal Home Remote System ... 139 System Identification ... 139 Universal Home Remote System ... 140 Universal Home Remote System Operation (With One Triangular LED) ... 140 Universal Home Remote System Operation (With Three Round LED) ... 145 Features and Controls Storage Areas ...
  • Page 93: Keys

    Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a closing...
  • Page 94: Remote Keyless Entry (Rke) System

    One key is used for the ignition and all locks. When a new vehicle is delivered to the dealer/ retailer, the key has a key tag. This tag has a bar-coded key code that tells your dealer/retailer how to make extra keys. This tag may be removed and kept by your dealer/retailer.
  • Page 95: Operation

    This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.
  • Page 96 Remote Keyless Entry (RKE) System Operation The vehicle’s doors can be locked and unlocked, and the trunk can be opened from about 3 feet (1 m) up to 197 feet (60 m) away with the Remote Keyless Entry (RKE) transmitter. If your vehicle has the remote vehicle start feature, you can also start the vehicle’s engine with the RKE transmitter.
  • Page 97 (Unlock): Press the unlock button to unlock the driver’s door. If the button is pressed again within five seconds, all remaining doors unlock. The interior lamps turn on and stay on for 20 seconds or until the ignition is turned on. If enabled through the DIC, the remote unlock feedback can be programmed to have the horn chirp and/or the turn signals flash when the...
  • Page 98 Battery Replacement Under normal use, the battery in your RKE transmitter should last about four years. The battery is weak if the transmitter will not work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it is probably time to change the battery.
  • Page 99 3. Put the two halves back together. Make sure the cover is on tight, so water does not get inside the transmitter. 4. Test the operation of the transmitter with the vehicle. Remote Vehicle Start Your vehicle may have a remote starting feature that allows you to start the engine from outside the vehicle.
  • Page 100 (Remote Start): If your vehicle has the remote start feature, the RKE transmitter will have a button with this symbol on it. To start the vehicle using the remote start feature, do the following: 1. Aim the transmitter at the vehicle. 2.
  • Page 101 The remote start feature provides two separate starts per ignition cycle, each with 10 minutes of engine running time. If the remote start procedure is used again before the first 10 minute time frame has ended, the first 10 minutes will immediately expire and the second 10 minute time frame will start.
  • Page 102: Doors And Locks

    Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers, especially children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
  • Page 103: Power Door Locks

    Power Door Locks The power door lock switches are located on the driver’s and front passenger’s door. Press the top of the switch to unlock all doors. Press the bottom of the switch to lock all doors. The rear doors do not have power door lock switches.
  • Page 104: Programmable Automatic Door Locks

    If a door is opened before the five seconds has elapsed, the doors do not lock until five seconds after all doors are closed. If the power door lock switch or the transmitter lock button is pressed twice when leaving the vehicle, the doors lock immediately.
  • Page 105: Rear Door Security Locks

    Rear Door Security Locks Your vehicle has rear door security locks. These prevent passengers from opening the rear doors from the inside. The rear door security locks are located on the inside edge of each rear door. Security Lock Label shown The rear doors must be open to access them.
  • Page 106: Lockout Protection

    Lockout Protection This feature prevents the driver’s door from being locked using the power door locks, if the key is left in the ignition and a door is open. Press the power door lock switch to lock all the doors and then unlock the driver’s door. Press and hold the power door lock switch for more than three seconds to override this feature.
  • Page 107 Remote Trunk Release Press the button located on the driver’s door near the map pocket to open the trunk. The trunk can only be opened while the vehicle is in PARK (P). Emergency Trunk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle.
  • Page 108: Windows

    Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 109: Power Windows

    Power Windows The power window switches are located on the armrest on the driver’s door. In addition, each passenger door has a switch for its own window. Express-Down Window The driver’s window has an express-down feature. This switch is labeled AUTO. Press the front of the switch part way, and the driver’s window opens a small amount.
  • Page 110 Programming the Power Windows If the battery on your vehicle has been recharged, disconnected, or is not working, you will need to reprogram the driver’s power window for the express-up feature to work. Replace or recharge the vehicle’s battery before reprogramming. To program the driver’s window, follow these steps: 1.
  • Page 111: Sun Visors

    In an emergency, the anti-pinch feature can be overridden in a supervised mode. Hold the window switch all the way up to the second position. The window rises for as long as the switch is held. Once the switch is released, the express mode is re-activated.
  • Page 112: Theft-Deterrent Systems

    Theft-Deterrent Systems Vehicle theft is big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. Content Theft-Deterrent Your vehicle may have a content theft-deterrent alarm system.
  • Page 113 Disarming the System To disarm the system: • Press the RKE transmitter unlock button. • Turn the ignition to ON to disarm the system. Once the system is disarmed, the security light will stop flashing. How the System Alarm is Activated To activate the system if it is armed: •...
  • Page 114: Pass-Key Iii+ Operation

    ® PASS-Key III+ ® The PASS-Key III+ system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
  • Page 115 When trying to start the vehicle if the engine does not start and the security light on the instrument panel cluster comes on, the key may have a damaged transponder. Turn the ignition off and try again. If the engine still does not start, and the key appears to be not damaged, try another ignition key.
  • Page 116: Starting And Operating Your Vehicle

    If you are ever driving and the security light comes on and stays on, you may be able to restart your engine if you turn it off. Your PASS-Key system, however, is not working properly and must be serviced by your dealer/retailer. Your vehicle is not protected by the ®...
  • Page 117: Ignition Positions

    Ignition Positions With the key in the ignition switch, you can turn it to four different positions. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key. Use the correct key and turn the key only with your hand.
  • Page 118: Retained Accessory Power (Rap)

    Key In the Ignition Never leave your vehicle with the keys inside, as it is an easy target for joy riders or thieves. If you leave the key in the ignition and park your vehicle, a chime sounds, when the driver’s door is opened.
  • Page 119 Operate the engine and transaxle gently to allow the oil to warm up and lubricate all moving parts. Your vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects components. If the ignition key is turned to the START position, and then released when the engine begins cranking, the engine will continue cranking for a few seconds or...
  • Page 120: Adjustable Throttle And Brake Pedal

    Adjustable Throttle and Brake Pedal If your vehicle has this feature, you can change the position of the throttle and brake pedals. This feature is designed for shorter drivers, since the pedals cannot move farther away from the standard position, but can move rearward for better pedal reach.
  • Page 121 To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the electrical cord. The engine coolant heater cord is located near the air cleaner box on the passenger side of the engine compartment. See Engine Compartment Overview on page 308 for more information on location.
  • Page 122: Automatic Transaxle Operation

    Automatic Transaxle Operation XE Model Your automatic transaxle has a shift lever located on the console between the seats. PARK (P): This position locks your front wheels. It is the best position to use when you start your engine because your vehicle cannot move easily. CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P)
  • Page 123 Make sure the shift lever is fully in PARK (P) before starting the engine. Your vehicle has an automatic transaxle shift lock control system. You have to apply your regular brake first and then press the shift lever button before you can shift from PARK (P).
  • Page 124 DRIVE (D): This position is for normal driving. It provides the best fuel economy for your vehicle. If you need more power for passing, and you are: • Going less than 35 mph (56 km/h), push your accelerator pedal about halfway down. •...
  • Page 125 Notice: If you drive in LOW (L) for more than 25 miles (40 km) or at speeds over 55 mph (90 km/h), you could damage your engine and/or transaxle. Use DRIVE (D) or INTERMEDIATE (I) as much as possible. Shift into LOW (L) only if your vehicle is going slower than 65 mph (105 km/h).
  • Page 126 The Driver Information Center (DIC) in the instrument cluster will change from the currently displayed message to the letter “M”, For MANUAL position, and a number indicating the requested gear range when moving the shift lever forward or rearward. While using the TAP-shift feature the transaxle will have firmer shifting and sportier performance.
  • Page 127: Parking Brake

    Parking Brake To set the parking brake, push down the parking brake pedal with your left foot. If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 194. To release the parking brake, hold the regular brake pedal down with your right foot.
  • Page 128: Shifting Into Park (P)

    Shifting Into Park (P) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
  • Page 129: Shifting Out Of Park (P)

    Torque Lock If you are parking on a hill and you do not shift the transaxle into PARK (P) properly, the weight of the vehicle can put too much force on the parking pawl in the transaxle. It could be difficult to pull the shift lever out of PARK (P).
  • Page 130: Parking Over Things That Burn

    Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell.
  • Page 131: Running The Engine While Parked

    Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
  • Page 132: Mirrors

    Mirrors Manual Rearview Mirror When you are sitting in a comfortable driving position, adjust the mirror so you can see clearly behind your vehicle. Hold the mirror in the center to move it up or down and side to side. The day/night adjustment allows you to adjust the mirror to avoid glare from the lamps behind you.
  • Page 133: Automatic Dimming Rearview Mirror With Onstar

    Automatic Dimming Rearview Mirror ® with OnStar and Compass Your vehicle may have an automatic dimming rearview mirror with a compass and OnStar The automatic dimming feature enables the mirror to sense nighttime glare from vehicle headlamps from behind and automatically dim to reduce the glare to a safe level.
  • Page 134 Compass Variance Compass variance is the difference between earth’s magnetic north and true geographic north. If the mirror is not adjusted for compass variance, the compass could give false readings. The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if the vehicle is driven outside zone eight.
  • Page 135: Outside Power Mirrors

    Outside Power Mirrors The controls for the outside power mirrors are located on the inside of the vehicle near the driver’s side mirror. Use the selector switch located above the four-way control panel to choose either the left or right outside mirror.
  • Page 136: Onstar Services

    ® OnStar service is provided to you subject to the ® OnStar Terms and Conditions. You may cancel ® your OnStar service at any time by contacting ® ® OnStar . A complete OnStar ® the OnStar Terms and Conditions are included in ®...
  • Page 137 Available Services included with Directions ® & Connections Plan • All Safe and Sound Plan Services • Driving Directions - Advisor delivered or ® OnStar Turn-by-Turn Navigation (If equipped) • RideAssist • Information and Convenience Services ® OnStar Hands-Free Calling ®...
  • Page 138 ® How OnStar Service Works In order to provide you with OnStar ® your vehicle’s OnStar system has the capability of recording and transmitting vehicle information. This information is automatically sent to an ® OnStar Call Center at the time of an OnStar button press, Emergency button press or if your airbags or AACN system deploys.
  • Page 139: Universal Home Remote System

    Universal Home Remote System System Identification Your vehicle may have a Universal Home Remote System. Determine which Universal Home Remote your vehicle has and then read the pages following for instructions on programming your specific system. If there is one triangular Light Emitting Diode (LED) indicator light above the Universal Home Remote buttons, follow the instructions under Universal Home Remote System Operation...
  • Page 140: Universal Home Remote System

    Universal Home Remote System The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting. This device complies with Part 15 of the FCC Rules.
  • Page 141 Read the instructions completely before attempting to program the Universal Home Remote. Because of the steps involved, it may be helpful to have another person available to assist you in the programming steps. Keep the original hand-held transmitter for use in other vehicles as well as for future Universal Home Remote programming.
  • Page 142 3. At the same time, press and hold both the desired Universal Home Remote button and the hand-held transmitter button. Do not release the buttons until Step 4 has been completed. Some entry gates and garage door openers may require you to substitute Step 3 with the procedure noted in “Gate Operator and Canadian Programming”...
  • Page 143 7. Firmly press and release the “Learn” or “Smart” button. The name and color of the button may vary by manufacturer. You will have 30 seconds to start Step 8. 8. Return to the vehicle. Firmly press and hold the programmed Universal Home Remote button for two seconds, then release it.
  • Page 144 Using Universal Home Remote Press and hold the appropriate Universal Home Remote button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing Universal Home Remote Buttons To erase programming from the three Universal Home Remote buttons: 1.
  • Page 145: Operation (With Three Round Led)

    Universal Home Remote System Operation (With Three Round LED) Your vehicle may have the Universal Home Remote System. If there are three round Light Emitting Diode (LED) indicator lights above the Universal Home Remote buttons, follow the instructions below. This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.
  • Page 146 Programming Universal Home Remote — Rolling Code Most garage door openers sold after 1996 are Rolling Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before you begin. If you do not follow these actions, the device will time out and you will have to repeat the procedure.
  • Page 147 2. Locate in the garage, the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. It can usually be found where the hanging antenna wire is attached to the motor-head unit and may be a colored button. Press this button. After you press this button, you will have 30 seconds to complete the following steps.
  • Page 148 Programming Universal Home Remote — Fixed Code Most garage door openers sold before 1996 are Fixed Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before you begin. If you do not follow these actions, the device will time out and you will have to repeat the procedure.
  • Page 149 Example of Eight Dip Switches with Two Positions Example of Eight Dip Switches with Three Positions Your panel of switches may not appear exactly as they do in the examples above, but they should be similar. The switch positions on your hand-held transmitter may be labeled, as follows: •...
  • Page 150 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
  • Page 151 You will have two and one-half minutes to complete Step 4. Now press one button on the Universal Home Remote for each switch setting as follows: • If you wrote “Left,” press the left button in the vehicle. • If you wrote “Right,” press the right button in the vehicle.
  • Page 152: Storage Areas

    Erasing Universal Home Remote Buttons You should erase the programmed buttons when you sell or terminate your lease. To erase either Rolling Code or Fixed Code on the Universal Home Remote device: 1. Press and hold the two outside buttons at the same time for approximately 20 seconds, until the indicator lights, located directly above the buttons, begin to blink rapidly.
  • Page 153: Center Console Storage Area

    Pull down the door on the back of the center console to use the rear seat cupholders. Center Console Storage Area Your vehicle has a center console with two storage areas. To access the upper tray storage, lift the passenger side lever. To access the lower storage area, lift the driver side lever.
  • Page 154: Sunroof

    Sunroof If your vehicle has a sunroof, the switch is located on the headliner between the map lamps. The sunroof will only operate while the ignition is in ON or in ACC, or if Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 118.
  • Page 155: Sunroof - Panoramic

    Sunroof - Panoramic If the vehicle has a panoramic sunroof, it has four glass panels that tilt or stack upon each other, when the sunroof control is turned to the vent or one of three opened positions. There is a separate control for the automatic sunshade.
  • Page 156 2 (First-Open Position): Turn the control to this position to open the panoramic sunroof about a third of the way. The second glass panel will retract and the fourth glass panel will stack above the roof. The sunshade will automatically retract to this position.
  • Page 157 Section 3 Instrument Panel Overview ... 160 Hazard Warning Flashers ... 162 Other Warning Devices ... 162 Horn ... 162 Tilt and Telescopic Steering Wheel ... 162 Turn Signal/Multifunction Lever ... 163 Turn and Lane-Change Signals ... 164 Headlamp High/Low-Beam Changer ... 164 Flash-to-Pass ...
  • Page 158 Section 3 Traction Control System (TCS) Warning Light ... 196 Enhanced Traction System Warning Light ... 197 Electronic Stability Control Indicator Light ... 197 Engine Coolant Temperature Warning Light ... 198 Engine Coolant Temperature Gage ... 198 Malfunction Indicator Lamp ... 199 Oil Pressure Light ...
  • Page 159 ✍ NOTES...
  • Page 160: Instrument Panel Overview

    Instrument Panel Overview...
  • Page 161 The main components of your instrument panel are the following: A. Air Outlets. See Outlet Adjustment on page 186. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 163. C. Instrument Panel Cluster. See Instrument Panel Cluster on page 188. D.
  • Page 162: Hazard Warning Flashers

    Hazard Warning Flashers The hazard warning flashers let you warn the police and others that you have a problem. The front and rear turn signal lamps will flash on and off. The hazard warning flasher button is located towards the center of the instrument panel.
  • Page 163: Turn Signal/Multifunction Lever

    To tilt and telescope the steering wheel, pull down the lever. Then move the steering wheel up or down or backward or forward into a comfortable position. Pull the lever up to lock the steering wheel in place. Do not adjust the tilt and telescope lever while driving.
  • Page 164: Turn And Lane-Change Signals

    Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions let you signal a turn or a lane change. To signal a turn, move the lever all the way up or down.
  • Page 165: Windshield Wipers

    Windshield Wipers Use this lever, located on the right side of the steering wheel, to operate the windshield wipers. (Off): Move the lever to this position to turn off the windshield wipers. (Intermittent; Speed Sensitive Wipers): Move & the lever to this position for intermittent or speed sensitive operation.
  • Page 166: Windshield Washer

    Damaged wiper blades can prevent you from seeing well enough to drive safely. Clear ice and snow from the wiper blades before using them to prevent damage. If the wiper blades are frozen to the windshield, carefully loosen or thaw them. If your blades do become damaged, get new blades.
  • Page 167: Cruise Control

    Cruise Control Cruise control lets you maintain a speed of about 25 mph (40 km/h) or more without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below 25 mph (40 km/h). CAUTION: Cruise control can be dangerous where you cannot drive safely at a steady speed.
  • Page 168 RES+ (Resume): Press RES+ to resume a set speed and to accelerate the speed. SET− (Set): Press SET– to set a speed and to decrease the speed. CANCEL: Press to cancel cruise control. To set a speed do the following: 1.
  • Page 169 Reducing Speed While Using Cruise Control If the cruise control system is already engaged: • Push and hold the SET− until the desired lower speed is reached, then release it. • To slow down in very small amounts, briefly push the SET−. Each time this is done, the vehicle goes about 1 mph (1.6 km/h) slower.
  • Page 170: Headlamps

    Headlamps The band on the lever on the outboard side of the steering column operates the exterior lamps. The exterior lamp control has the following four positions: (Headlamps): Turn the band to this position to turn on the headlamps, parking lamps, and taillamps.
  • Page 171: Headlamps Off In Park (P)

    Headlamps Off in PARK (P) This feature works when the ignition is ON and it is dark outside. To turn the headlamps off when it is dark outside but keep other exterior lights on, turn the exterior lamp control to the parking lamp position.
  • Page 172: Automatic Headlamp System

    When the DRL system is on, the taillamps, sidemarker lamps, parking lamps, and instrument panel lights are not on unless you turn the exterior lamps control to the parking lamp position. As with any vehicle, you should turn on the regular headlamp system when they are needed.
  • Page 173: Fog Lamps

    Fog Lamps If your vehicle has fog lamps, the fog lamp button is located on the instrument panel, to the left of the steering wheel. The ignition must be on for the fog lamps to work. Push the button to turn the fog lamps on. An indicator light in the button will glow when the fog lamps are on.
  • Page 174: Dome Lamp

    Dome Lamp Your vehicle might have a dome lamp without a switch. If the dome lamp has a switch, the following are the settings. (Off): Move the lever to this position to turn the lamp off, even when a door is open. (Door): Move the lever to this position so that the lamp comes on when a door is opened.
  • Page 175: Parade Dimming

    Parade Dimming Parade dimming is a separate lighting mode that comes on while the parking lamps are turned on during the day. It prevents the display lights and indicator lights from being dim, while the parking lamps are used during the day. Overhead Console Reading Lamps The vehicle may have reading lamps on the overhead console.
  • Page 176: Accessory Power Outlet(S)

    Accessory Power Outlet(s) Accessory power outlets can be used to connect auxiliary electrical equipment such as a cellular telephone or CB radio. There are two accessory power outlets. One accessory power outlet is inside the center storage console and the other is located on the center storage console below the climate controls.
  • Page 177: Climate Controls

    Climate Controls Climate Control System With this system you can control the heating, cooling and ventilation for your vehicle. If your vehicle has the remote start feature, the climate control system functions as part of the remote start feature. See Remote Keyless Entry (RKE) System Operation on page 96.
  • Page 178 (Recirculation): Press the left side of the button to turn the recirculation mode on. The air inside the vehicle will be recirculated through the climate control system and the vehicle, not from outside your vehicle. This mode is helpful when trying to limit odors from entering the vehicle and for maximum air conditioning performance in hot weather.
  • Page 179 Maximum Air Conditioning On hot days, open the windows to let hot inside air escape; then close them. This helps reduce the time it takes for the vehicle to cool down. It also helps the air conditioning system operate more efficiently. For quick cool down on hot days, do the following: 1.
  • Page 180 (Defrost): This mode directs most of the air to the windshield with some air directed to the floor vents. In this mode, the system automatically forces outside air into the vehicle. The air-conditioning compressor does not run unless the outside temperature is at or below freezing. The air-conditioning compressor operates although the indicator light is not on.
  • Page 181: Automatic Climate Control System

    If your vehicle has the remote start feature, the rear defogger automatically turned on if it is cold outside. When the vehicle transitions out of the remote start mode, the rear defogger turns off. See Remote Keyless Entry (RKE) System Operation on page 96.
  • Page 182 Use the steps below to place the entire system in automatic mode: 1. Turn the fan knob and the mode knob to the AUTO position. The current set temperature displays. When AUTO is selected, the air conditioning operation and air inlet is automatically controlled.
  • Page 183 (Vent): Use this mode to direct air to the instrument panel outlets. (Bi-Level): Use this mode to direct half of the air to the instrument panel outlets, and the remaining air to the floor outlets. (Floor): Use this mode to direct most of the air to the floor outlets with some air directed to the side window outlets.
  • Page 184 Temperature Control: Press the up and down arrows to increase or decrease the temperature inside the vehicle. (Air Conditioning): Press this button to turn the air conditioning compressor on and off. A light above the button comes on while the air conditioning is on.
  • Page 185 (Defrost): Turn the mode knob to this position to defrost the windshield. The system automatically controls the fan speed if defrost is selected from the AUTO mode. If the outside temperature is 40°F (4°C) or warmer, the air conditioning compressor automatically runs to help dehumidify the air and dry the windshield.
  • Page 186: Outlet Adjustment

    Remote Start Climate Control Operation If your vehicle has remote start and it is activated, the climate control system heats and cools the inside of the vehicle using the previous system settings before the vehicle was turned off. The climate control knobs will remain active during a remote start.
  • Page 187: Warning Lights, Gages, And Indicators

    Warning Lights, Gages, and Indicators This part describes the warning lights and gages on your vehicle. The pictures help to locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gages could also save you or others from injury.
  • Page 188: Instrument Panel Cluster

    Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, how much fuel you are using, and many other things you will need to drive safely and economically.
  • Page 189: Speedometer And Odometer

    Speedometer and Odometer Your speedometer lets you see your speed in miles per hour (mph) or kilometers per hour (km/h). See DIC Vehicle Personalization on page 211 for more information. Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada).
  • Page 190: Passenger Safety Belt Reminder Light

    Passenger Safety Belt Reminder Light Several seconds after the key is turned to ON or START, a chime will sound for several seconds to remind the front passenger to buckle their safety belt. This would only occur if the passenger airbag is enabled.
  • Page 191: Passenger Airbag Status Indicator

    CAUTION: If the airbag readiness light stays on after you start your vehicle, it means the airbag system may not be working properly. The airbags in your vehicle may not inflate in a crash, or they could even inflate without a crash.
  • Page 192 If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the right front passenger’s frontal airbag and seat-mounted side impact airbag are enabled (may inflate). CAUTION: If the on indicator comes on when you have a rear-facing child restraint installed in the right front passenger’s seat, it means that the passenger sensing system has not...
  • Page 193: Charging System Light

    If the word OFF or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the right front passenger’s frontal airbag and seat-mounted side impact airbag. See Passenger Sensing System on page 80 for more on this, including important safety information.
  • Page 194: Brake System Warning Light

    Brake System Warning Light Your vehicle’s hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop you. For good braking, though, you need both parts working well. If the warning light comes on, there is a brake problem.
  • Page 195: Antilock Brake System Warning Light

    CAUTION: Your brake system may not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to an accident. If the light is still on after you have pulled off the road and stopped carefully, have the vehicle towed for service.
  • Page 196: Low Tire Pressure Warning Light

    Low Tire Pressure Warning Light This light will come on briefly when you turn the ignition to RUN. This light will also come on when one or more of your tires are significantly underinflated. A CHECK TIRE PRESS DIC message will accompany the light, see DIC Warnings and Messages on page 206 for more information.
  • Page 197: Enhanced Traction System

    Enhanced Traction System Warning Light If your vehicle has the enhanced traction control system, this light may come on for the following reasons: • If you turn the system off by pressing the enhanced traction control button located on the center console, the light will come on and stay on.
  • Page 198: Engine Coolant Temperature

    Engine Coolant Temperature Warning Light This light indicates that the engine coolant has overheated or the radiator cooling fan is not working. This light will come on briefly when you turn on the ignition as a check to show you it is working. If the light comes on and the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle, and turn off the...
  • Page 199: Malfunction Indicator Lamp

    Malfunction Indicator Lamp Check Engine Light Your vehicle has a computer which monitors operation of the fuel, ignition, and emission control systems. This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment.
  • Page 200 This light will also come on during a malfunction in one of two ways: • Light Flashing — A misfire condition has been detected. A misfire increases vehicle emissions and may damage the emission control system on your vehicle. Diagnosis and service may be required.
  • Page 201 Did you just drive through a deep puddle of water? If so, your electrical system may be wet. The condition will usually be corrected when the electrical system dries out. A few driving trips should turn the light off. Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel.
  • Page 202: Oil Pressure Light

    Oil Pressure Light If your vehicle has low engine oil pressure, this light will stay on after you start your engine, or come on and you will hear a chime when you are driving. This indicates that your engine is not receiving enough oil.
  • Page 203: Cruise Control Light

    Cruise Control Light This light comes on whenever you set the cruise control. The light goes out when the cruise control is turned off. See Cruise Control on page 167 for more information. Highbeam On Light This light comes on when the high-beam headlamps are in use.
  • Page 204: Driver Information Center (Dic)

    Here are four things that some owners ask about. These are normal and do not indicate a problem with your fuel gage: • At the service station, the gas pump shuts off before the gage reads full. • It takes a little more or less fuel to fill up than the gage indicated.
  • Page 205: Dic Operation And Displays

    DIC Operation and Displays The DIC comes on when the ignition is on. The DIC has different modes which can be accessed by pressing the DIC buttons. The button functions are detailed in the following. Information Modes (Information): Press this button to scroll through the following vehicle information modes: Outside Air Temperature and Odometer Press the information button until the outside...
  • Page 206: Dic Warnings And Messages

    ECON (Economy) Press the information button until ECON is displayed. This mode shows how many miles per gallon (mpg) or liters per 100 kilometers (L/100 km) your vehicle is getting based on current and past driving conditions. Press and hold the reset button while ECON is displayed to reset the average fuel economy.
  • Page 207 AUTO (Automatic) LIGHTS OFF This message displays if the automatic headlamp system is disabled with the headlamp switch. See Automatic Headlamp System on page 172 for more information. AUTO (Automatic) LIGHTS ON This message displays if the automatic headlamp system is enabled with the headlamp switch. See Automatic Headlamp System on page 172 for more information.
  • Page 208 CRUISE ENGAGED This message displays when the cruise control system is active. See Cruise Control on page 167 for more information. DOOR AJAR This message displays if one or more of the vehicle’s doors are not closed properly. Make sure that the door(s) are closed completely.
  • Page 209 KEY FOB BATT (Battery) LOW This message displays if the Remote Keyless Entry (RKE) transmitter battery is low. Replace the battery in the transmitter. See “Battery Replacement” under Remote Keyless Entry (RKE) System Operation on page 96. LOW FUEL This message displays when your vehicle is low on fuel.
  • Page 210 SERVICE AIR BAG This message displays when there is a problem with the airbag system. Have your vehicle serviced by your retailer immediately. SERVICE ESC (ELECTRONIC STABILITY CONTROL) If your vehicle has Electronic Stability Control (ESC), this message displays and a chime sounds if there has been a problem detected with ESC.
  • Page 211: Dic Vehicle Personalization

    Adjust your driving accordingly. See Enhanced Traction System (ETS) on page 255 or Traction Control System (TCS) on page 253 and Enhanced Traction System Warning Light on page 197 or Traction Control System (TCS) Warning Light on page 196 for more information. TRUNK AJAR This message displays when the trunk is not closed completely.
  • Page 212 Personalization Menu Modes OIL LIFE RESET When this feature is displayed, you can reset the engine oil life system. To reset the system, see Engine Oil Life System on page 315. See “OIL LIFE” under DIC Operation and Displays on page 205 for more information.
  • Page 213 LOCK HORN If your vehicle has Remote Keyless Entry (RKE), this feature, which allows the vehicle’s horn to chirp every time the lock button on the RKE transmitter is pressed, can be enabled or disabled. When LOCK HORN appears on the display, press and hold the reset button for at least one second to scroll through the available settings: OFF (default): The horn will not chirp on the...
  • Page 214 LIGHT FLASH If your vehicle has Remote Keyless Entry (RKE), this feature, which allows the vehicle’s exterior hazard/turn signal lighting to flash every time the lock, unlock, or trunk release buttons on the RKE transmitter are pressed, can be enabled or disabled.
  • Page 215 AUTO UNLK (Unlock) This feature, which allows the vehicle to automatically unlock certain doors, can be enabled or disabled. When AUTO UNLK appears on the display, press and hold the reset button for at least one second to scroll through the available settings: ALL (default): All of the doors will automatically unlock.
  • Page 216 EXT (Exterior) LIGHTS If your vehicle has Remote Keyless Entry (RKE), this feature, which allows the vehicle’s exterior perimeter lighting to turn on each time the unlock button on the RKE transmitter is pressed, can be enabled or disabled. When EXT LIGHTS appears on the display, press and hold the reset button for at least one second to scroll through the available settings:...
  • Page 217: Audio System(S)

    Audio System(s) Determine which radio your vehicle has and then read the pages following to familiarize yourself with its features. CAUTION: This system provides you with far greater access to audio stations and song listings. Giving extended attention to entertainment tasks while driving can cause a crash and you or others can be injured or killed.
  • Page 218: Setting The Time

    Setting the Time If your vehicle has a radio with a single CD player, the radio has a (clock) button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2.
  • Page 219 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY displays. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, increases by one.
  • Page 220: Radio With Cd (Mp3)

    Radio with CD (MP3) Radio with CD shown, Radio with Six-Disc CD similar Radio Data System (RDS) The audio system has a Radio Data System (RDS). The RDS feature is available for use only on FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available.
  • Page 221 Speed Compensated Volume (SCV): The radio has Speed Compensated Volume (SCV). While SCV is on, the radio volume automatically adjusts to compensate for road and wind noise as driving speed changes. That way, the volume level should sound about the same as you drive. To activate SCV: 1.
  • Page 222 Storing a Radio Station as a Favorite Drivers are encouraged to set up their radio station favorites while the vehicle is parked. Tune to your favorite stations using the presets, favorites button, and steering wheel controls if the vehicle has this feature. See Defensive Driving on page 246.
  • Page 223 Setting the Tone (Bass/Midrange/Treble) BASS/MID/TREB (Bass, Midrange, or Treble): To adjust bass, midrange, or treble, press the knob until the tone control labels display. Continue pressing to highlight the desired label, or press the pushbutton positioned under the desired label. Turn the tune knob clockwise or counterclockwise to adjust the highlighted setting.
  • Page 224 Finding a Category (CAT) Station CAT (Category): The CAT button is used to find XM™ stations while the radio is in the XM™ mode. To find XM™ channels within a desired category, perform the following: 1. Press the BAND button until the XM™ frequency displays.
  • Page 225 Radio Messages Calibration Error: The audio system has been calibrated for your vehicle from the factory. If Calibration Error displays, it means that the radio has not been configured properly and your vehicle must be returned to your dealer/retailer for service.
  • Page 226 When a CD is inserted, the CD symbol displays on the CD. As each new track starts to play, the track number displays. The CD player can play the smaller 3 inch (8 cm) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner.
  • Page 227 For the Six-Disc CD player, press and hold the EJECT button for two seconds to eject all discs. (Tune): Turn the knob to select tracks on the CD currently playing. © ¨ © SEEK : Press the left go to the start of the current track, if more than ten seconds have played.
  • Page 228 BAND: Press this button to listen to the radio while a CD is playing. The CD remains inside the radio for future listening. CD/AUX (CD/Auxiliary): Press this button to play a CD while listening to the radio. The CD icon and a message showing disc and/or track number displays when a CD is in the player.
  • Page 229: Using An Mp3

    Using the Auxiliary Input Jack The radio system has an auxiliary input jack located on the lower right side of the faceplate. This is not an audio output; do not plug the headphone set into the front auxiliary input jack. However, an external audio device such as an iPod, laptop computer, MP3 player, CD changer, or cassette tape player, etc.
  • Page 230 Compressed Audio The radio also plays discs that contain both uncompressed CD audio (.CDA files) and MP3 files. By default the radio reads only the uncompressed audio and ignore the MP3 files. Pressing the CAT button toggles between compressed and uncompressed audio format. MP3 Format If you burn your own MP3 disc on a personal computer:...
  • Page 231 Playlists can be changed by using the previous and next folder buttons, the buttons. An MP3 CD-R or CD-RW that was recorded using no file folders can also be played. If a CD-R or CD-RW contains more than the maximum of 50 folders, 50 playlists, and 255 files, the player lets you access and navigate up to the maximum, but all items over the maximum are not accessible.
  • Page 232 Order of Play Tracks recorded to the CD-R or CD-RW are played in the following order: • Play begins from the first track in the first playlist and continues sequentially through all tracks in each playlist. When the last track of the last playlist has played, play continues from the first track of the first playlist.
  • Page 233 As each new track starts to play, the track number and song title displays. EJECT: Press this button to eject CD-R(s) or CD-RW(s). To eject the CD-R or CD-RW that is currently playing, press and release this button. A beep sounds and Ejecting Disc displays. Once the disc is ejected, Remove Disc displays.
  • Page 234 RDM (Random): With the random setting, MP3 files on the CD-R or CD-RW can be listened to in random, rather than sequential order, on one CD-R/CD-RW or all discs in a six-disc CD player. To use random, do one of the following: 1.
  • Page 235 Once the disc has scanned, the player defaults to playing MP3 files in order by artist. The current artist playing is shown on the second line of the display between the arrows. Once all songs by that artist are played, the player moves to the next artist in alphabetical order on the CD-R or CD-RW and begins playing MP3 files by that artist.
  • Page 236: Xm Radio Messages

    XM Radio Messages Radio Display Message XL (Explicit XL on the radio display, Language Channels) after the channel name, indicates content with explicit language. XM Updating Updating encryption code The encryption code in the receiver is being updated, and No XM Signal Loss of signal Loading XM Acquiring channel audio...
  • Page 237 Radio Display Message No CAT Info Category Name not available No Information No Text/Informational message available CAT Not Found No channel available for the chosen category XM TheftLocked Theftlock XM Radio ID Radio ID label (channel 0) If tuned to channel 0, this message alternates with the Unknown Radio ID not known (should only be if...
  • Page 238: Rear Seat Audio (Rsa)

    Rear Seat Audio (RSA) Your vehicle might have rear seat audio (RSA). This feature lets rear seat passengers listen to and control any of the sources, such as the radio or CD(s). An audio or radio source can be listened to but cannot be changed from the rear seat if the front seat passengers have selected the same source from the front seat controls.
  • Page 239 SRCE (Source): Press this button to play a CD when listening to the radio. If your vehicle has a six-disc CD player and other CDs are loaded, the inactive CDs remains inside the radio for future listening. BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped).
  • Page 240 For optimal audio performance, the headphones must be worn correctly. The symbol L (Left) appears on the upper left side, above the ear pad and should be positioned on the left ear. The symbol R (Right) appears on the upper right side, above the ear pad and should be positioned on the right ear.
  • Page 241: Theft-Deterrent Feature

    Theft-Deterrent Feature ® THEFTLOCK is designed to discourage theft of your vehicle’s radio. The feature works automatically by learning a portion of the Vehicle Identification Number (VIN). If the radio is moved to a different vehicle, it does not operate and LOCKED displays.
  • Page 242: Radio Reception

    Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.
  • Page 243: Care Of Your Cds

    Care of Your CDs Handle CDs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom surface of the disc. If the surface of a CD is damaged, such as cracked, broken, or scratched, the CD does not play properly or not at all.
  • Page 244: Xm™ Satellite Radio Antenna System

    Because this antenna is built into the rear window, there is a reduced risk of damage caused by car washes and vandals. If static is heard on the radio, when the rear window defogger is turned on, it could mean that a defogger grid line has been damaged and the grid line must be repaired.
  • Page 245: Driving Your Vehicle

    Section 4 Your Driving, the Road, and Your Vehicle ... 246 Defensive Driving ... 246 Drunken Driving ... 247 Control of a Vehicle ... 250 Braking ... 250 Antilock Brake System (ABS) ... 251 Braking in Emergencies ... 253 Traction Control System (TCS) ... 253 Enhanced Traction System (ETS) ...
  • Page 246: Your Driving, The Road, And Your Vehicle

    Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 18. CAUTION: Defensive driving really means “Be ready for anything.”...
  • Page 247: Drunken Driving

    Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It is the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
  • Page 248 According to the American Medical Association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin, or vodka.
  • Page 249 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
  • Page 250: Control Of A Vehicle

    That means you can lose control of your vehicle. See Traction Control System (TCS) on page 253 and Electronic Stability Control on page 256. Adding non-Saturn accessories can affect your vehicle’s performance. See Accessories and Modifications on page 297. Braking See Brake System Warning Light on page 194.
  • Page 251: Antilock Brake System (Abs)

    Once the power assist is used up, it may take longer to stop and the brake pedal will be harder to push. Adding non-Saturn accessories can affect your vehicle’s performance. See Accessories and Modifications on page 297.
  • Page 252 Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
  • Page 253: Braking In Emergencies

    Remember: ABS does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you will not have time to apply the brakes if that vehicle suddenly slows or stops.
  • Page 254 The TCS operates in all transmission shift lever positions except PARK (P), NEUTRAL (N) or REVERSE (R). But the system can upshift the transmission only as high as the shift lever position you’ve chosen, so you should use the lower gears only when necessary. See Automatic Transaxle Operation on page 122.
  • Page 255: Enhanced Traction System (Ets)

    Enhanced Traction System (ETS) Your vehicle may have an Enhanced Traction System (ETS) that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction.
  • Page 256: Electronic Stability Control

    To turn the system on or off, press the traction control button (TC) located on the center console. In order to effectively “rock” the vehicle, you will need to turn off the traction control system. When you turn the system off, the ETS warning light will come on and stay on and the TRACTION OFF message will display.
  • Page 257 If the system fails to turn on or activate, the ESC light will be on solid, and the ESC OFF or SERVICE ESC message will be displayed in the DIC. If the vehicle has gone through heavy acceleration or braking during the first two miles after starting your vehicle, these messages and the ESC light may also appear.
  • Page 258 Traction Control Operation The traction control system is part of the ESC system. Traction control limits wheel spin by reducing engine power to the wheels (engine speed management) and by applying brakes to each individual wheel (brake-traction control) as necessary. The traction control system is enabled automatically when you start your vehicle, and it will activate and display the LOW TRACTION...
  • Page 259: Steering

    Steering If your vehicle has the hydraulic power steering system and you lose power steering assist because the engine stops or the power steering system is not functioning, you can steer, but it will take much more effort. Steering Tips It is important to take curves at a reasonable speed.
  • Page 260 Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
  • Page 261: Off-Road Recovery

    Off-Road Recovery You may find that your vehicle’s right wheels have dropped off the edge of a road onto the shoulder while you are driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
  • Page 262 So here are some tips for passing: • Drive ahead. Look down the road, to the sides, and to crossroads for situations that might affect your passing patterns. If you have any doubt whatsoever about making a successful pass, wait for a better time. •...
  • Page 263: Loss Of Control

    • Try not to pass more than one vehicle at a time on two-lane roads. Reconsider before passing the next vehicle. • Do not overtake a slowly moving vehicle too rapidly. Even though the brake lamps are not flashing, it might be slowing down or starting to turn.
  • Page 264: Driving At Night

    If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid if it occurs.
  • Page 265 No one can see as well at night as in the daytime. But as we get older these differences increase. A 50-year-old driver might require at least twice as much light to see the same thing at night as a 20-year-old.
  • Page 266: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you cannot stop, accelerate, or turn as well because your tire-to-road traction is not as good as on dry roads. And, if your tires do not have much tread left, you will get even less traction.
  • Page 267 CAUTION: Wet brakes can cause accidents. They may not work as well in a quick stop and may cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car wash, apply the brake pedal lightly until the brakes work normally.
  • Page 268: City Driving

    Driving Through Flowing Water CAUTION: Flowing or rushing water creates strong forces. If you try to drive through flowing water, as you might at a low water crossing, your vehicle can be carried away. As little as six inches of flowing water can carry away a smaller vehicle.
  • Page 269: Freeway Driving

    Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
  • Page 270: Before Leaving On A Long Trip

    The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic flow. Treat the left lane on a freeway as a passing lane.
  • Page 271: Highway Hypnosis

    Of course, you will find experienced and able service experts at dealers/retailers all across the United States and Canada. They are ready and willing to help if you need it. Here are some things you can check before a trip: •...
  • Page 272: Hill And Mountain Roads

    Hill and Mountain Roads Driving on steep hills or mountains is different from driving in flat or rolling terrain. If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. •...
  • Page 273 CAUTION: Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. The brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
  • Page 274: Winter Driving

    Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You might want to put winter emergency supplies in your trunk. Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning...
  • Page 275 What is the worst time for this? Wet ice. Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it can offer the least traction of all. You can get wet ice when it is about freezing, 32°F (0°C), and freezing rain begins to fall.
  • Page 276 If You Are Caught in a Blizzard If you are stopped by heavy snow, you could be in a serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow.
  • Page 277 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking the exhaust pipe.
  • Page 278: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow

    If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow In order to free your vehicle when it is stuck, you will need to spin the wheels, but you do not want to spin your wheels too fast. The method known as rocking can help you get out when you are stuck, but you must use caution.
  • Page 279: Loading Your Vehicle

    Loading Your Vehicle It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification/Tire label.
  • Page 280 The Tire and Loading Information label also lists the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation, see Tires on page 348 and Inflation - Tire Pressure on page 356.
  • Page 281 Example 1 Item Description Maximum Vehicle Capacity Weight for Example 1 = Subtract Occupant Weight 150 lbs (68 kg) × 2 = Available Occupant and Cargo Weight = Total Item 1,000 lbs (453 kg) 300 lbs (136 kg) 700 lbs (317 kg) Example 2 Description Maximum Vehicle...
  • Page 282 Example 3 Item Description Maximum Vehicle Capacity Weight for Example 3 = Subtract Occupant Weight 200 lbs (91 kg) × 5 = Available Cargo Weight = 0 lbs (0 kg) Refer to your vehicle’s Tire and Loading Information label for specific information about your vehicle’s maximum vehicle capacity weight and seating positions.
  • Page 283 CAUTION: Do not load your vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on your vehicle can break, and it can change the way your vehicle handles. These could cause you to lose control and crash.
  • Page 284: Towing

    Towing Towing Your Vehicle Consult your retailer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Assistance Program on page 427. If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see “Recreational Vehicle Towing”...
  • Page 285 Dinghy Towing When dinghy towing, the vehicle should be run at the beginning of each day and at each RV fuel stop for about five minutes. This will ensure proper lubrication of transmission components. You may dinghy tow your vehicle from the front following these steps: 1.
  • Page 286 Notice: Towing your vehicle from the rear could damage it. Also, repairs would not be covered by the warranty. Never have your vehicle towed from the rear. Dolly Towing To tow your vehicle with two wheels on the ground and a dolly: 1.
  • Page 287: Towing A Trailer

    Towing a Trailer CAUTION: If you do not use the correct equipment and drive properly, you can lose control when you pull a trailer. For example, if the trailer is too heavy, the brakes may not work well — or even at all. You and your passengers could be seriously injured.
  • Page 288 If You Do Decide to Pull a Trailer If you do, here are some important points: • There are many different laws, including speed limit restrictions, having to do with trailering. Make sure your rig will be legal, not only where you live but also where you’ll be driving.
  • Page 289 vehicle, and the amount of tongue weight the vehicle can carry. See “Weight of the Trailer Tongue” later in this section for more information. Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all the required trailering equipment.
  • Page 290: Safety Chains

    Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inflated to the upper limit for cold tires. You’ll find these numbers on the Tire-Loading Information label. See Loading Your Vehicle on page 279. Then be sure you don’t go over the GVW limit for your vehicle, including the weight of the trailer tongue.
  • Page 291 Driving with a Trailer Towing a trailer requires a certain amount of experience. Before setting out for the open road, you’ll want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as responsive as your vehicle is by itself.
  • Page 292 Making Turns Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. Your vehicle could be damaged. Avoid making very sharp turns while trailering. When you’re turning with a trailer, make wider turns than normal.
  • Page 293 Parking on Hills CAUTION: You really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start to move. People can be injured, and both your vehicle and the trailer can be damaged.
  • Page 294 Maintenance When Trailer Towing Your vehicle will need service more often when you’re pulling a trailer. See Scheduled Maintenance on page 406 for more information. Things that are especially important in trailer operation are automatic transmission fluid (don’t overfill), engine oil, axle lubricant, drive belt, cooling system and brake system.
  • Page 295: Service And Appearance Care

    Section 5 Service ... 297 Accessories and Modifications ... 297 California Proposition 65 Warning ... 298 Doing Your Own Service Work ... 298 Adding Equipment to the Outside of Your Vehicle ... 299 Fuel ... 299 Gasoline Octane ... 299 Gasoline Specifications ...
  • Page 296 Section 5 Tire Inspection and Rotation ... 362 When It Is Time for New Tires ... 363 Buying New Tires ... 363 Different Size Tires and Wheels ... 365 Uniform Tire Quality Grading ... 366 Wheel Alignment and Tire Balance ... 367 Wheel Replacement ...
  • Page 297: Service

    You will get genuine Saturn parts and Saturn-trained and supported service people. We hope you will want to keep your Saturn vehicle all Saturn. Genuine Saturn parts have one of these marks.
  • Page 298: California Proposition 65 Warning

    California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many fluids, and some component wear by-products contain and/or emit these chemicals.
  • Page 299: Adding Equipment To The Outside Of Your Vehicle

    Use of the recommended fuel is an important part of the proper maintenance of your vehicle. To help keep the engine clean and maintain optimum vehicle performance, Saturn recommends the use of gasoline advertised as TOP TIER Detergent Gasoline. The 8th digit of the Vehicle Identification Number (VIN) shows the code letter or number that identifies your vehicle’s engine.
  • Page 300: Gasoline Specifications

    See Malfunction Indicator Lamp on page 199. If this occurs, return to your authorized Saturn retailer for diagnosis. If it is determined that the condition is caused by the type of fuel used, repairs may not be covered by your warranty.
  • Page 301: Fuels In Foreign Countries

    Notice: Your vehicle was not designed for fuel that contains methanol. Do not use fuel containing methanol. It can corrode metal parts in the fuel system and also damage plastic and rubber parts. That damage would not be covered under your warranty. Some gasolines that are not reformulated for low emissions may contain an octane-enhancing additive called methylcyclopentadienyl manganese...
  • Page 302: Filling The Tank

    Filling the Tank CAUTION: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
  • Page 303 To open the fuel door, apply pressure in the center of the rear edge of the fuel door and it will pop open. To remove the fuel cap, turn it slowly to the left (counterclockwise). The fuel cap has a spring in it; if the cap is released too soon, it will spring back to the right.
  • Page 304 When replacing the fuel cap, turn it to the right (clockwise) until it clicks. Make sure the cap is fully installed. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere.
  • Page 305: Filling A Portable Fuel Container

    Filling a Portable Fuel Container CAUTION: Never fill a portable fuel container while it is in your vehicle. Static electricity discharge from the container can ignite the gasoline vapor. You can be badly burned and your vehicle damaged if this occurs. To help avoid injury to you and others: •...
  • Page 306: Checking Things Under The Hood

    Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a fire.
  • Page 307 2. Then go to the front of the vehicle and push the secondary hood release handle toward the driver side of the vehicle. 3. Lift the hood. 4. After the hood is slightly lifted, it will continue to open to the full position. Before closing the hood, be sure all the filler caps are on properly.
  • Page 308: Engine Compartment Overview

    Engine Compartment Overview When you open the hood on the 3.5L V6 engine, this is what you see:...
  • Page 309 A. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 317. B. Power Steering Fluid Reservoir. See Power Steering Fluid on page 332. C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 312. D.
  • Page 310 When you open the hood on the 3.6L V6 engine, this is what you see:...
  • Page 311 A. Engine Air Cleaner/Filter. See Engine Air Cleaner/Filter on page 317. B. Power Steering Fluid Reservoir. See Power Steering Fluid on page 332. C. Engine Oil Fill Cap. See “When to Add Engine Oil” under Engine Oil on page 312. D.
  • Page 312: Engine Oil

    Engine Oil If your vehicle has the 3.5L V6 engine and the LOW OIL LEVEL message appears on the Driver Information Center (DIC), check the engine oil level right away. For more information, see LOW OIL LEVEL under DIC Warnings and Messages on page 206.
  • Page 313 When to Add Engine Oil 3.5L Engine 3.6L Engine If the oil is below the cross-hatched area at the tip of the dipstick, you need to add at least one quart/ liter of oil. But you must use the right kind. This section explains what kind of oil to use.
  • Page 314 What Kind of Engine Oil to Use Look for three things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. Look for and use only an oil that meets GM Standard GM6094M. • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle.
  • Page 315: Engine Oil Life System

    Notice: Use only engine oil identified as meeting GM Standard GM6094M and showing the American Petroleum Institute Certified For Gasoline Engines starburst symbol. Failure to use the recommended oil can result in engine damage not covered by your warranty. If you are in an area of extreme cold, where the temperature falls below −20°F (−29°C), it is recommended that you use either an SAE 5W-30 synthetic oil or an SAE 0W-30 oil.
  • Page 316 If the system is ever reset accidentally, you must change the oil at 3,000 miles (5 000 km) since your last oil change. Remember to reset the oil life system whenever the oil is changed. How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle...
  • Page 317: Engine Air Cleaner/Filter

    Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil by putting it in the trash, pouring it on the ground, into sewers, or into streams or bodies of water.
  • Page 318 3. Inspect or replace the engine air cleaner/filter. 4. Align the filter correctly using alignment tab. 5. Install cover by guiding the tabs on the rim of the top cover into the bottom hinges and turn the cover down to close it. 6.
  • Page 319: Automatic Transaxle Fluid (3.5L V6 Engine)

    Automatic Transaxle Fluid (3.5L V6 Engine) It is not necessary to check the transaxle fluid level. A transaxle fluid leak is the only reason for fluid loss. If a leak occurs, take your vehicle to the dealer/retailer service department and have it repaired as soon as possible.
  • Page 320 If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. Notice: Too much or too little fluid can damage the transaxle. Too much can mean that some of the fluid could come out and fall on hot engine or exhaust system parts, starting a fire.
  • Page 321 See Engine Compartment Overview on page 308 for more information on location. 1. Remove the dipstick and wipe it with a clean rag or paper towel. 2. Reinstall it back in all the way, wait three seconds and then pull it back out again. 3.
  • Page 322: Engine Coolant

    Engine Coolant The cooling system in your vehicle is filled with ® DEX-COOL engine coolant. This coolant is designed to remain in your vehicle for five years or 150,000 miles (240 000 km), whichever occurs first, if you add only DEX-COOL life coolant.
  • Page 323 What to Use Use a mixture of one-half clean, drinkable water ® and one-half DEX-COOL coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your cooling system can be dangerous.
  • Page 324 Checking Coolant The engine coolant surge tank is located in the rear of the engine compartment. See Engine Compartment Overview on page 308 for more information on location. CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly.
  • Page 325: Pressure Cap

    Adding Coolant If you need more coolant, add the proper ® DEX-COOL coolant mixture at the surge tank, but only when the engine is cool. If the surge tank is empty, a special fill procedure is necessary. See Engine Overheating on page 325 and Cooling System on page 328.
  • Page 326 If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Turn it off and get everyone away from the vehicle until it cools down.
  • Page 327: Overheated Engine Protection Operating Mode

    If you get the overheat warning with no sign of steam, try this for a minute or so: 1. In heavy traffic, let the engine idle in NEUTRAL (N) while stopped. If it is safe to do so, pull off the road, shift to PARK (P) or NEUTRAL (N) and let the engine idle.
  • Page 328: Cooling System

    Cooling System When you decide it is safe to lift the hood, here is what you will see: 3.5L V6 Engine shown, 3.6L V6 Engine similar A. Electric Engine Cooling Fans (Out of View) B. Engine Coolant Surge Tank C. Pressure Cap CAUTION: An electric engine cooling fan under the hood can start up even when the engine...
  • Page 329 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant.
  • Page 330 How to Add Coolant to the Coolant Surge Tank Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause your engine to overheat and be severely damaged. If you have not found a problem yet, check to see if coolant is visible in the surge tank.
  • Page 331 CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you would not get the overheat warning.
  • Page 332: Power Steering Fluid

    2. Then keep turning the pressure cap slowly, and remove it. 3. Fill the coolant surge tank with the proper mixture, to the FULL COLD mark on the front of the surge tank. Wait about five minutes, then check to see if the level is below the FULL COLD mark.
  • Page 333 When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless a leak is suspected in the system, or an unusual noise is heard. A fluid loss in this system could indicate a problem. Have the system inspected and repaired.
  • Page 334: Windshield Washer Fluid

    Windshield Washer Fluid What to Use When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
  • Page 335: Brakes

    Brakes Brake Fluid The brake master cylinder reservoir is filled with DOT-3 brake fluid. See Engine Compartment Overview on page 308 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear.
  • Page 336 What to Add When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. See Recommended Fluids and Lubricants on page 415. Always clean the brake fluid reservoir cap and the area around the cap before removing it.
  • Page 337 Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time your vehicle is moving, except when you are pushing on the brake pedal firmly.
  • Page 338: Battery

    Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality brake parts.
  • Page 339: Jump Starting

    Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batteries can hurt you. They can be dangerous because: •...
  • Page 340 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
  • Page 341 CAUTION: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle.
  • Page 342 6. Connect the red positive (+) cable to the positive (+) terminal of the dead battery. Use a remote positive (+) terminal if the vehicle has one. 7. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good battery.
  • Page 343 Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
  • Page 344: Bulb Replacement

    Bulb Replacement For the type of bulb to use, see Replacement Bulbs on page 346. For any bulb changing procedure not listed in this section, contact your retailer. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb.
  • Page 345 To replace a sidemarker lamp, turn signal lamp, or a back-up lamp: 1. Open the trunk. See Trunk on page 106 for more information. 2. Remove the convenience net, if the vehicle has one. 3. Remove the wing nuts holding the trunk trim. 4.
  • Page 346: License Plate Lamp

    License Plate Lamp To replace the license plate lamp bulb: 1. Remove the two screws holding the license plate lamp assembly to the fascia. 2. Turn and pull the license plate lamp forward through the fascia opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket.
  • Page 347: Windshield Wiper Blade Replacement

    Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 406 for more information on wiper blade inspection. Replacement blades come in different types and are removed in different ways. Here is how to remove the wiper blade: 1.
  • Page 348: Tires

    Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your Saturn Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle.
  • Page 349: Tire Sidewall Labeling

    Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type, and service description.
  • Page 350 (D) Tire Identification Number (TIN): The letters and numbers following DOT (Department of Transportation) code is the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture.
  • Page 351 (B) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (C) Tire Identification Number (TIN): The letters and numbers following the DOT (Department of Transportation) code is the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured.
  • Page 352 Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire: The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S.
  • Page 353: Tire Terminology And Definitions

    Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories.
  • Page 354 Intended Outboard Sidewall: The side of an asymmetrical tire, that must always face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure. Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles.
  • Page 355 Radial Ply Tire: A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread. Rim: A metal support for a tire and upon which the tire beads are seated. Sidewall: The portion of a tire between the tread and the bead.
  • Page 356: Inflation - Tire Pressure

    Inflation - Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Do not let anyone tell you that under-inflation or over-inflation is all right. It is not. If your tires do not have enough air (under-inflation), you can get the following: •...
  • Page 357: Tire Pressure Monitor System

    How to Check Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they are under-inflated. Check the tire’s inflation pressure when the tires are cold.
  • Page 358 As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
  • Page 359 The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. See your Saturn retailer for service if all TPMS sensors are installed and the error message comes on and stays on.
  • Page 360 You have two minutes to match each tire and wheel position. If it takes longer than two minutes to match any tire and wheel position, the matching process stops and you need to start over. The TPMS matching process is outlined below: 1.
  • Page 361 9. The driver side rear turn signal comes on to indicate that corner’s sensor is ready to be learned. Proceed to the driver side rear tire, and repeat the procedure in Step 6. 10. After hearing the single horn chirp for the driver side rear tire, two additional horn chirps sound to indicate the tire learning process is done.
  • Page 362: Tire Inspection And Rotation

    Tire Inspection and Rotation Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 363 and Wheel Replacement on page 367 for more information.
  • Page 363: When It Is Time For New Tires

    When It Is Time for New Tires One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. You need a new tire if any of the following statements are true: •...
  • Page 364 GM’s exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM’s TPC Spec number is molded onto the tire’s sidewall by the tire manufacturer. If the tires have an all-season tread design, the TPC spec number will be followed by an MS for mud and snow.
  • Page 365: Different Size Tires And Wheels

    You may increase the chance that you will crash and suffer serious injury. Only use Saturn specific wheel and tire systems developed for your vehicle, and have them properly installed by a Saturn certified technician.
  • Page 366: Uniform Tire Quality Grading

    Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance.
  • Page 367: Wheel Alignment And Tire Balance

    Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
  • Page 368 If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new Saturn original equipment parts. This way, you will be sure to have the right wheel, wheel bolts and wheel nuts for your vehicle.
  • Page 369: Tire Chains

    Tire Chains CAUTION: Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash.
  • Page 370: Changing A Flat Tire

    A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you would use in a skid. In any rear blowout remove your foot from the accelerator pedal. Get the vehicle under control by steering the way you want the vehicle to go.
  • Page 371 CAUTION: (Continued) 3. Turn off the engine and do not restart while the vehicle is raised. 4. Do not allow passengers to remain in the vehicle. To be even more certain the vehicle will not move, you should put blocks at the front and rear of the tire farthest away from the one being changed.
  • Page 372: Removing The Spare Tire And Tools

    Removing the Spare Tire and Tools The equipment you will need is located in the trunk. 1. Open the trunk. See Trunk on page 106 for more information. 2. Lift the handle on the spare tire cover. The handle can hook on the front edge of the trunk’s weatherstrip to hold the cover out of the way.
  • Page 373 1. Turn the plastic wing nut counterclockwise to loosen the wheel wrench. 2. Unhook the wheel wrench from the jack. 3. Extend the handle on the wheel wrench by pressing the button with your index finger and pulling on the end of the wrench. You must do this before using the wheel wrench.
  • Page 374: Removing The Flat Tire And Installing The Spare Tire

    Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. Please see Changing a Flat Tire on page 370 for more information. 2. If your vehicle has a wheel cover or hubcap that has plastic wheel nut caps, then loosen the plastic nut caps.
  • Page 375 5. Position the lift head at the jack location nearest the flat tire. Make sure all of the jack lift head is touching the jacking flange under the body. Do not place the jack under a body panel. The lower body panel has an arrow to aid in locating the jacking location.
  • Page 376 8. Remove all of the wheel nuts. 9. Remove the flat tire. 7. Raise the vehicle by turning the wheel wrench clockwise. Raise the vehicle far enough off the ground so there is enough room for the compact spare tire to fit underneath the wheel well.
  • Page 377 CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from the places where the wheel attaches to the vehicle.
  • Page 378 13. Lower the vehicle by turning the wheel wrench counterclockwise. Lower the jack completely. CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts.
  • Page 379: Storing A Flat Or Spare Tire And Tools

    14. Tighten the wheel Notice: Wheel covers will not fit on your vehicle’s compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged. Storing a Flat or Spare Tire nuts firmly in a and Tools crisscross sequence,...
  • Page 380 3. Place the jack over the bolt (A) on the floor, making sure it contacts the bolt as shown, and thread the jack retainer nut until it contacts the jack. 4. With the valve stem up, place the tire on the compartment floor with the rear of the tire beneath the trim panel (tire may not lay completely flat).
  • Page 381: Compact Spare Tire

    The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can. See Compact Spare Tire on page 381. See the storage instructions label to replace your compact spare into your trunk properly.
  • Page 382: Appearance Care

    Appearance Care Cleaning the Inside of Your Vehicle Your vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on your upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces.
  • Page 383: Fabric/Carpet

    Do not clean your vehicle using the following cleaners or techniques: • Never use a knife or any other sharp object to remove a soil from any interior surface. • Never use a stiff brush. It can cause damage to your vehicle’s interior surfaces. •...
  • Page 384: Instrument Panel, Vinyl, And Other Plastic Surfaces

    To clean, use the following instructions: 1. Saturate a lint-free, clean white cloth with water or club soda. 2. Wring the cloth to remove excess moisture. 3. Start on the outside edge of the soil and gently rub toward the center. Continue cleaning, using a clean area of the cloth each time it becomes soiled.
  • Page 385: Care Of Safety Belts

    Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
  • Page 386: Finish Care

    Occasional waxing or mild polishing of your vehicle by hand may be necessary to remove residue from the paint finish. You can get approved cleaning products from your Saturn retailer. See Vehicle Care/Appearance Materials on page 389. Your vehicle has a basecoat/clearcoat paint finish.
  • Page 387: Aluminum Wheels

    Aluminum Wheels Notice: Chrome wheels and other chrome trim may be damaged if you do not wash your vehicle after driving on roads that have been sprayed with magnesium, calcium or sodium chloride. These chlorides are used on roads for conditions such as ice and dust.
  • Page 388: Tires

    Minor chips and scratches can be repaired with touch-up materials available from your Saturn retailer. Larger areas of finish damage can be corrected in your Saturn retailer’s body and paint shop. Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody.
  • Page 389: Chemical Paint Spotting

    Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on your vehicle. This damage can take two forms: blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. Although no defect in the paint job causes this, we will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout...
  • Page 390: Vehicle Identification

    Description Removes swirl marks, fine Swirl Remover Polish scratches, and other light surface contamination. Removes light scratches Cleaner Wax and protects finish. Cleans, shines, and Foaming Tire Shine protects in one easy step. Low Gloss No wiping necessary. Medium foaming shampoo.
  • Page 391: Service Parts Identification Label

    Engine Identification The eighth character in the VIN is the engine code. This code helps you identify your vehicle’s engine, specifications, and replacement parts. Service Parts Identification Label This label is on the inside of the glove box. It is very helpful if you ever need to order parts. The label has the following information: •...
  • Page 392: Windshield Wiper Fuses

    Windshield Wiper Fuses The windshield wiper motor is protected by an internal circuit breaker and a fuse. If the motor overheats due to heavy snow, etc., the wiper will stop until the motor cools. If the overload is caused by some electrical problem, have it fixed. Power Windows and Other Power Options Fuses in the fuse block protect the power windows.
  • Page 393: Instrument Panel Fuse Block

    Instrument Panel Fuse Block The instrument panel fuse block is located on the passenger’s side of the vehicle, on the lower portion of the instrument panel near the floor. Remove the panel cover to access the fuse block, then remove the fuse block cover to access the fuses.
  • Page 394 Your vehicle might not have all the fuses and features listed.
  • Page 395 Fuses Usage POWER Power Mirrors MIRRORS Not Used INSTALLED Cruise Control Switch, Passenger RUN/CRANK Airbag Status Indicator HVAC Heating Ventilation Air Conditioning BLOWER HIGH Blower - High Speed Relay CLUSTER/ Instrument Panel Cluster, Theft THEFT Deterrent System ® ONSTAR OnStar Not Used INSTALLED AIRBAG (IGN)
  • Page 396: Engine Compartment Fuse Block

    Engine Compartment Fuse Block Your vehicle may not be equipped with all the fuses and features listed. The engine compartment fuse block is located on the driver’s side of the engine compartment, near the battery.
  • Page 397 Fuses Usage Air Conditioner Clutch Electronic Throttle Control Engine Control Module IGN 1 (LZ4) Transmission Control Module Ignition 1 Mass Airflow Sensor (LY7) Emission Left Headlamp Low-Beam Horn Right Headlamp Low-Beam Front Fog Lamps Left Headlamp High-Beam Right Headlamp High-Beam Engine Control Module BATT (LY7) Windshield Wiper Anti-lock Brake System (IGN 1)
  • Page 398: Rear Compartment Fuse Block

    Relays Cooling Fan 1 Cooling Fan Series/Parallel Cooling Fan 2 Starter Run/Crank, Ignition Powertrain Air Conditioning Clutch High Beam Front Fog Lamps Horn Low-Beam Headlamp Windshield Wiper 1 Windshield Wiper 2 Daytime Running Lamps Stoplamps Diodes Wiper Rear Compartment Fuse Block Usage The rear compartment fuse block is located in the trunk of the vehicle.
  • Page 399 Fuses Usage Passenger Seat Controls Driver Seat Controls Not Used Not Used Fuses Usage Belt Alternator Starter (BAS) Park Lamps, Instrument Panel Dimming Not Used...
  • Page 400 Fuses Not Used Not Used Sunroof Controls Not Used Not Used Audio Amplifier Heated Seat Controls Not Used Remote Keyless Entry (RKE) System, XM™ Satellite Radio Back-up Lamps Not Used Not Used Auxiliary Power Outlets Not Used Trunk Release Rear Defog Heated Mirrors Fuel Pump Usage...
  • Page 401: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to Recommended Fluids and Lubricants on page 415 for more information. Application Air Conditioning Refrigerant R134a Automatic Transaxle (Bottom Pan Removal) Automatic Transaxle – 4 Speed Automatic Transaxle –...
  • Page 402 Engine 3.5L V6 3.6L V6 Engine Specifications VIN Code Transaxle Automatic Automatic Spark Plug Gap 0.040 inches (1.0 mm) 0.044 inches (1.1 mm)
  • Page 403 Section 6 Maintenance Schedule ... 404 Introduction ... 404 Maintenance Requirements ... 404 Your Vehicle and the Environment ... 404 Using the Maintenance Schedule ... 404 Scheduled Maintenance ... 406 Additional Required Services ... 408 Maintenance Footnotes ... 409 Maintenance Schedule Owner Checks and Services ...
  • Page 404: Maintenance Schedule

    Using the Maintenance Schedule We at Saturn want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week.
  • Page 405 So, unless you are technically qualified and have the necessary equipment, you should have your Saturn retailer do these jobs. When you go to your Saturn retailer for your service needs, you will know that Saturn-trained and supported service technicians will perform the work using genuine Saturn parts.
  • Page 406: Scheduled Maintenance

    Scheduled Maintenance When the CHANGE OIL SOON message in the Driver Information Center (DIC) comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year.
  • Page 407 Change engine oil and filter. See Engine Oil on page 312. Reset oil life system. See Engine Oil Life System on page 315. An Emission Control Service. Visually check for any leaks or damage. See footnote (j). Inspect engine air cleaner filter. If necessary, replace filter. See Engine Air Cleaner/Filter on page 317.
  • Page 408: Additional Required Services

    Additional Required Services The following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
  • Page 409: Maintenance Footnotes

    Service and Miles (Kilometers) Engine cooling system service (or every five years, whichever occurs first). An Emission Control Service. See footnote (i). Inspect engine accessory drive belt. An Emission Control Service. See footnote (m). Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc.
  • Page 410 (e) Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors, and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
  • Page 411: Owner Checks And Services

    These owner checks and services should be performed at the intervals specified to help ensure the safety, dependability, and emission control performance of your vehicle. Your Saturn retailer can assist you with these checks and services. Be sure any necessary repairs are completed at once.
  • Page 412: At Each Fuel Fill

    At Each Fuel Fill It is important to perform these underhood checks at each fuel fill. Engine Oil Level Check Check the engine oil level and add the proper oil if necessary. See Engine Oil on page 312 for further details. Notice: It is important to check the engine oil regularly and keep it at the proper level.
  • Page 413: At Least Once A Year

    3. Try to start the engine in each gear. The vehicle should start only in PARK (P) or NEUTRAL (N). If the vehicle starts in any other position, contact your Saturn retailer for service. Automatic Transaxle Shift Lock Control System Check...
  • Page 414 The ignition should turn to OFF only when the shift lever is in PARK (P). • The ignition key should come out only in OFF. Contact your Saturn retailer if service is required. Parking Brake and Automatic Transaxle Park (P) Mechanism Check CAUTION: When you are doing this check, your vehicle could begin to move.
  • Page 415: Recommended Fluids And Lubricants

    Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification can be obtained from your dealer/retailer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Engine Oil Certified for Gasoline Engines starburst symbol.
  • Page 416: Normal Maintenance Replacement Parts

    Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your Saturn retailer. Part Engine Air Cleaner/Filter Engine Oil Filter 3.5L V6 Engine 3.6L V6 Engine Spark Plugs 3.5L V6 Engine 3.6L V6 Engine Windshield Wiper Blades Driver’s Side –...
  • Page 417: Engine Drive Belt Routing

    Engine Drive Belt Routing 3.5L V6 Engine 3.6L V6 Engine...
  • Page 418: Maintenance Record

    Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 404. Any additional information from Owner Checks and Services on page 411 can be added on the following record pages.
  • Page 419 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
  • Page 420 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
  • Page 421: Customer Assistance Information

    United States Government ... 434 Customer Assistance Information Reporting Safety Defects to the Canadian Government ... 434 Reporting Safety Defects to Saturn ... 434 Service Publications Ordering Information ... 435 Vehicle Data Recording and Privacy ... 436 Event Data Recorders ... 437 OnStar ...
  • Page 422: Customer Assistance And Information

    Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your retailer and to Saturn. Together we are committed to providing our customers with unparalleled service, before, during, and after the purchase of a Saturn vehicle, for total customer satisfaction.
  • Page 423 Saturn vehicle. However, if you continue to remain unsatisfied after following the procedure outlined in Steps One and Two, Saturn and its retailers offer the additional assistance of a neutral party through our voluntary participation in a mediation/arbitration program called Better Business Bureau (BBB) Auto Line.
  • Page 424 For further information concerning eligibility in the Canadian Motor Vehicle Arbitration Plan (CAMVAP), call toll-free 1-800-207-0685. Alternatively, you may call the Saturn Customer Communication Centre, 1-800-263-1999, or you may write to: Mediation/Arbitration Program c/o Customer Communication Centre...
  • Page 425: Online Owner Center

    Online Owner Center Online Owner Center (United States only) The Owner Center is a resource for your Saturn ownership needs. Specific vehicle information can be found in one place. The Online Owner Center allows you to: • Get e-mail service reminders.
  • Page 426: Customer Assistance For Text Telephone (Tty) Users

    Canada may dial 1-800-263-3830. Customer Assistance Offices Saturn encourages customers to call the toll-free number for assistance. If a customer wishes to write to Saturn, the letter should be addressed to: Saturn Customer Assistance Center 100 Saturn Parkway Mail Code 371-999-S24...
  • Page 427: Gm Mobility Reimbursement Program

    For vehicles purchased in Canada, call 1-800-268-6800. Service is available 24 hours a day, 365 days a year. As the owner of a new Saturn vehicle, you are automatically enrolled in the Saturn Roadside Assistance Program. Who is Covered? Roadside Assistance coverage is for the vehicle operator, regardless of ownership.
  • Page 428 In Canada, the vehicle registration is also required. • Emergency Tow From a Public Roadway or Highway: Tow to the nearest Saturn retailer for warranty service or in the event of a vehicle-disabling accident. Winch-out assistance is provided when the vehicle is mired in sand, mud, or snow.
  • Page 429 However, any cost for parts and labor for non-warranty repairs are the responsibility of the driver. Saturn and General Motors of Canada Limited reserve the right to limit services or reimbursement to an owner or driver when, in their sole discretion, the claims become excessive in frequency or type of occurrence.
  • Page 430: Collision Damage Repair

    Roadside Assistance is not part of or included in the coverage provided by the New Vehicle Limited Warranty. Saturn and General Motors of Canada Limited reserve the right to make any changes or discontinue the Roadside Assistance program at any time without notification.
  • Page 431 Repair Facility GM also recommends that you choose a collision repair facility that meets your needs before you ever need collision repairs. Your Saturn retailer may have a collision repair center with GM-trained technicians and state of the art equipment, or...
  • Page 432 If an Accident Occurs Here is what to do if you are involved in an accident. • Try to relax and then check to make sure you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured.
  • Page 433 • Choose a reputable collision repair facility for your vehicle. Whether you select a Saturn retailer or a private collision repair facility to fix the damage, make sure you are comfortable with them. Remember, you will have to feel comfortable with their work for a long time.
  • Page 434: Reporting Safety Defects

    2780 Sheffield Road Ottawa, Ontario K1B 3V9 Reporting Safety Defects to Saturn In addition to notifying NHTSA (or Transport Canada) in a situation like this, please notify Saturn. Call 1-800-553-6000, or write: Saturn Corporation 100 Saturn Parkway Mail Drop 371-999-S24...
  • Page 435: Service Publications Ordering Information

    Service Publications Ordering Information Service Manuals A variety of publications are available to you. Saturn service manuals are written for trained technicians, and in some cases, specialized tools and equipment are necessary to complete certain repairs. However, the manuals are...
  • Page 436: Vehicle Data Recording And Privacy

    fix your vehicle. They can help a technician service your vehicle better. Most bulletins apply to conditions affecting a small number of vehicles. Your Saturn retailer or a qualified technician may have to determine if a specific bulletin applies to your vehicle. To order...
  • Page 437: Event Data Recorders

    EDR. Saturn will not access this data or share it with others except: with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee;...
  • Page 438: Onstar

    RFID technology in Saturn vehicles does not use or record personal information or link with any other Saturn system containing personal...
  • Page 439 Accessories and Modifications ... 297 Adding Equipment to Your Airbag-Equipped Vehicle ... 87 Additives, Fuel ... 300 Add-On Electrical Equipment ... 391 Adjustable Throttle and Brake Pedal ... 120 Air Cleaner/Filter, Engine ... 317 Air Conditioning ... 177, 181 Airbag Passenger Status Indicator ...
  • Page 440 Audio System (cont.) Care of Your CDs ... 243 Radio with CD ... 220 Rear Seat Audio (RSA) ... 238 Setting the Time ... 218 Theft-Deterrent Feature ... 241 Understanding Radio Reception ... 242 XM™ Satellite Radio Antenna System ... 244 Automatic Climate Control System ...
  • Page 441 Chemical Paint Spotting ... 389 Child Restraints Child Restraint Systems ... 47 Infants and Young Children ... 43 Lower Anchors and Tethers for Children ... 54 Older Children ... 40 Securing a Child Restraint in a Rear Seat Position ... 62 Securing a Child Restraint in the Right Front Seat Position ...
  • Page 442 Customer Assistance Information (cont.) Customer Satisfaction Procedure ... 422 GM Mobility Reimbursement Program ... 427 Reporting Safety Defects to Saturn ... 434 Reporting Safety Defects to the Canadian Government ... 434 Reporting Safety Defects to the United States Government ... 434 Roadside Assistance Program ...
  • Page 443 Electrical System (cont.) Fuses ... 392 Instrument Panel Fuse Block ... 393 Power Windows and Other Power Options ... 392 Rear Compartment Fuse Block ... 398 Windshield Wiper Fuses ... 392 Electronic Stability Control ... 256 Engine Air Cleaner/Filter ... 317 Check and Service Engine Soon Light ...
  • Page 444 Fuel (cont.) Gage ... 203 Gasoline Octane ... 299 Gasoline Specifications ... 300 Fuses ... 392 Engine Compartment Fuse Block ... 396 Instrument Panel Fuse Block ... 393 Rear Compartment Fuse Block ... 398 Windshield Wiper ... 392 Gage Engine Coolant Temperature ... 198 Fuel ...
  • Page 445 Ignition Positions ... 117 Infants and Young Children, Restraints ... 43 Inflation - Tire Pressure ... 356 Instrument Panel Overview ... 160 Instrument Panel (I/P) Brightness ... 173 Cluster ... 188 Jump Starting ... 339 Keyless Entry System ... 94 Keys ...
  • Page 446 Lighting Entry/Exit ... 174 Parade Dimming ... 175 Lights ... 170 Flash-to-Pass ... 164 High/Low Beam Changer ... 164 On Reminder ... 170 Loading Your Vehicle ... 279 Lockout Protection ... 106 Locks Delayed Locking ... 103 Door ... 102 Lockout Protection ...
  • Page 447 Navigation System, Privacy ... 438 New Vehicle Break-In ... 116 Normal Maintenance Replacement Parts ... 416 Odometer ... 189 Odometer, Trip ... 189 Off-Road Recovery ... 261 Engine ... 312 Pressure Light ... 202 Oil, Engine Oil Life System ... 315 Older Children, Restraints ...
  • Page 448 Removing the Flat Tire and Installing the Spare Tire ... 374 Removing the Spare Tire and Tools ... 372 Replacement Bulbs ... 346 Reporting Safety Defects Canadian Government ... 434 Saturn ... 434 United States Government ... 434 ... 132...
  • Page 449 Restraint System Check Checking the Restraint Systems ... 88 Replacing Restraint System Parts After a Crash ... 89 Retained Accessory Power (RAP) ... 118 Right Front Passenger Position, Safety Belts ... 32 Roadside Assistance Program ... 427 Rocking Your Vehicle to Get it Out ... 278 Routing, Engine Drive Belt ...
  • Page 450 Service (cont.) California Proposition 65 Warning ... 298 Doing Your Own Work ... 298 Engine Soon Light ... 199 Publications Ordering Information ... 435 Servicing Your Airbag-Equipped Vehicle ... 86 Sheet Metal Damage ... 388 Shifting Into Park (P) ... 128 Shifting Out of Park (P) ...
  • Page 451 Tires ... 348 Aluminum Wheels, Cleaning ... 387 Buying New Tires ... 363 Chains ... 369 Changing a Flat Tire ... 370 Cleaning ... 388 Compact Spare Tire ... 381 Different Size ... 365 If a Tire Goes Flat ... 369 Inflation - Tire Pressure ...
  • Page 452 Vehicle Control ... 250 Damage Warnings ... 5 Loading ... 279 Symbols ... 5 Vehicle Data Recording and Privacy ... 436 Vehicle Identification Number (VIN) ... 390 Service Parts Identification Label ... 391 Vehicle Personalization DIC ... 211 Ventilation Adjustment ... 186 Visors ...

This manual is also suitable for:

2009 aura

Table of Contents