① To pass cables to upside of ceiling, please, make about
50~60mm hole on the ceiling panel.
You can use "Guide Pattern" for
the making holes.
③ Wire cables to terminal block and connect the terminal
blocks to main unit.
⑤ Insert the fixing screw tightly and detach the protection
vinyl from dome cover.
Installation using Pendant Mount Bracket
10
② Detach the marked part from the rubber gasket and
srew the surface mount bracket to the ceiling with
fixing screws.
④ Insert the main body into the surface mount bracket
with the molding lines on each part being aligned
and turning clockwise.
www.ernitec.com
Indoor Mini Speed Dome Camera