Sequential Numbering - SATO GL408e User Manual

Sequential numbering

Hexadecimal ESC
code
<1B>16
Initial value Nil
When power switch is
Valid range OFF
and term of Valid range within item
command
Valid range between
items
[Function]
This is a control function to specify data to be sequentially incremented or decremented.
In the data stream this command should be placed before EPC write command.
[Format]
<F> a a a a b c c c c (, dd, e e, f)
[Parameters]
Number of times to repeat the same data : 0001-9999
aaaa
Plus or minus symbol (+ for increments; - for decrements)
b
Value of step for sequence (0001-9999)
cccc
Number of digits for sequential numbering (01-99), if these digits are left out, the default is 8.
,dd
Number of digits free from sequential numbering (00-99) starting with the rightmost position.
,ee
If these digits are left out, the default is 0.
Decimal or Hexadecimal : 0 = decimal
f
[Coding Example 1] Write EPC and Lock Tag
Number of times to repeat the same data : 1, incrementing :+, step of sequence:1,Number of digits for
Sequential numbering: 5, Number of digits free from sequential numbering: 0
<A>
<V> 100<H>100<X21>, Sequential Test
＜F＞1+1,5,0＜IP0＞e:z,d:1122334455ABCDEF01234567,a:1111AAAA,m:00001;
<Q> 2
<Z>
F Parameter
<46>16 a a a a b c c c c, d d, e e, f
The set parameter is not maintained.
The set parameter becomes invalid.
The set parameter becomes invalid.
1= Hexadecimal
When this digit is left out, the default is 0.
28
ESC+F