Print Test Label - SATO CX208/212 Programming Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 95

Print Test Label

<ESC>CT
Example: <ESC>CT
Placement: This command should be sent in a separate data
stream
Default: There is no default for this command.
To print a test label
1. The Test Label can also be printed manually by simultaneously
pressing the FEED and READY INDICATOR buttons. When the
Test Label is manually initiated, the printer will be in the
hexadecimal print mode after it finishes printing. This mode is
used for diagnostic troubleshooting and lists the current status of
the printer configuration. (see Page 9 of the User's Guide).
PN 9001092 Rev. A
CX208/212 Programming Guide
SATO CX208/212 Printers