Revision History; Designated Use; Checking The Consignment - Siemens SITRANS FS230 Operating Instructions Manual

1 Introduction
1.1 Purpose of the documentation
This document contains all essential health and safety information required for safe use of the device.
Before installation and commissioning of the device, the operating instructions on the electronic data medium must be read
carefully.
1.2

Revision history

The following table shows major changes in the documentation compared to the previous edition.
Edition Remarks
02/2017
•
1.3

Designated use

Use the device to measure process medium in accordance with the information in the operating instructions.
Note
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
1.4

Checking the consignment

1. Check the packaging and the delivered items for visible damage.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
Do not use damaged or incomplete devices.
•
2
FW version
First edition
1.00.00
HW version EDD version
01
•
•
•
•
•
HART device
revision
SIMATIC PDM
1
driver for
HART 1.00.00
SIMATIC PDM
driver for
Modbus
1.00.00
AMS driver for
HART 1.00.00
FC475 driver
for HART
1,00.00
DTM/FDT
driver for
HART 1.00.00
SITRANS FS230
A5E38755607-AA, 02/2017