3.2
General safety instructions for machine operation
This device is built according to the current technical rules and regulations. However, dangers may
arise if the device is used in an inappropriate manner or out of accordance with regulations.
The information contained in the user's manual designed to protect the user from injury. It
additionally serves to avoid mistakes, thus assuring that the device runs safely and disturbance-free
In order to avoid dangers and to ensure optimal performance, neither alterations nor reconstructions
are to be performed on the machine unless explicitly approved by the manufacturer.
The device may only be used in technical and operationally safe conditions in accordance with the
instructions contained within this user's manual.
In the case of damage occurring due to a lack of observance of this operation manual, the guarantee
is voided. We take no responsibility for subsequent damages.
The manufacturer assumes no liability for damages to persons, objects or property that occur due to
inappropriate handling or a lack of adherence to the safety instructions. In these cases, the
guarantee is voided.
3.3
Special safety instruction for the machine
The information pertaining to work safety corresponds to the regulations of the European Union at
the time at which the device was manufactured.
General directions
Warning: Never leave the Procusini unattended when in use!
Warning: High temperatures may develop in the printing head of the Procusini. For this
reason, never grasp the printer while in operation. Change the food cartridge only after the
printer has cooled down sufficiently
Warning: The power supply plug must always be in the vicinity of the printer and be easily
reachable.
Warning: In the case of emergency, immediately disconnect the power source and power
plug!
Warning: In order to prevent fire or electrocution, never set this device onto damp or wet
surfaces.
For questions, please do not hesitate to email us at:
User´s Manual for Procusini
service@procusini.com
Page 8 of 33
Need help?
Do you have a question about the 3.0 and is the answer not in the manual?