Cleaning The Heatable Stainless Steel Tip; Cleaning Of The Production Plate; Cleaning Of The Flexible Production Mat, Silicone; Standby Mode - Procusini 3.0 User Manual

Cleaning the heatable stainless steel tip

• Screw off the heatable stainless steel tip from the cartridge holder with a counterclockwise
rotation.
• Clean the tip with warm water and soap.
Important! Screw on the stainless steel tip only hand-tight.
Warning! The stainless steel tip warms up during operation. Let it cool down long enough
before removing it for cleaning.

Cleaning of the production plate

The production plate is fixed to the device table by means of 3 magnets only. In this way you have
the possibility to remove it for cleaning. To extend the life of your production plate, we recommend
to clean it by hand.
Important! Use moderately warm water only to avoid the deformation of your production
plate. Do not use any scouring sponges or scouring agents that might scratch the
production plate.

Cleaning of the flexible production mat, silicone

The flexible production mat is dishwasher safe in the top tray of your dishwasher. Due to the
corrosive effects of dishwashing detergents, we recommend to wash it by hand in order to increase
the life span of your flexible production mat.
Wipe off with a damp, soft sponge, then rinse thoroughly. A mild detergent or soap can be used. Do
not use scouring sponges. Shake off excess water and leave the flexible production mat to air dry.
Store flatly, the flexible production mat must not be bent or folded.
Do not cut on the flexible production mat. Do not use any sharp objects which can perforate
or cut up the production mat. Never use a flexible production mat which has tears or cuts.
6.4

Standby mode

If you do not start a production order for 2 hours, your Procusini goes into standby mode
automatically. In order to get started again, press "Connect".
For questions, please do not hesitate to email us at:
User´s Manual for Procusini
service@procusini.com
Page 28 of 33