Basic Information; General Description - Procusini 3.0 User Manual

User´s Manual for Procusini

1 Basic Information

1.1

General description

The Procusini is an easy-to-use Procusini for use in commercial kitchen, e.g. in catering, event
gastronomy or bakery/confectionery.
It consists of a heatable cartridge holder, which is mounted to a positioning unit and operated via
WLAN. The x and y axis are controlled by a tooth belt, while the z axis and the extruder are set into
motion by threaded rods. The cartridge holder is located at the end of the y axis and during the
production process is moved upwards layer by layer by means of the z-motor. The production plate
represents the x axis and serves as a bearing surface for the pads to be printed (flexible production
mat; plates; breads etc.). The food is filled into food-safe cartridges or are available as food-safe
refills. These cartridges are inserted into the cartridge holder and if necessary heated to a
temperature specifically defined for the food item. There is no direct contact between the food item
located in the cartridge and the device itself.
For questions, please do not hesitate to email us at: service@procusini.com
Page 4 of 33