Qualification Of Personnel; Safety Procedures / Precautions; General Introduction And Definition Of The Safety Instructions - Procusini 3.0 User Manual

3d food printer for commercial use
Table of Contents

Advertisement

2 Qualification of personnel

This machine requires proper training. It is ONLY recommended for use by individuals with sufficient
training and/or those that are monitored by a person who has been properly trained on the safety
and intended use of the machine.
This machine is not meant for use by children.
This machine is to be operated by a single person!
Troubleshooting, service, and maintenance are to be performed only by qualified individuals who are
familiar with the technology and dangers of the machine and have been authorized by Print2Taste.
Work on electrical components is to be performed only by trained electricians.
The address for service is found in Chapter 6 of this user's manual.

3 Safety Procedures / Precautions

The following information pertaining to safety- and possible hazards is important not only for
protection of the machine, but also to protect the user. Please read through the following points
carefully:
3.1

General introduction and definition of the safety instructions

Important safety- and device-relevant instructions are represented as symbols in this handbook. The
directions are to be followed at all times in order to prevent accidents or damage to people or things.
WARNING! Danger from electrical current! This symbol indicates a situation in which
dangerous situations may exist due to electrical currents. If this safety information is
ignored, injury or a life-threatening situation may result.
WARNING! This symbol indicates dangers which may lead to injuries. Uphold all of the
given safety instructions exactly as indicated and pay special attention in such cases.
WARNING! Hot surface! This symbol indicates that a hot surface is present on the machine
during operation. If this is ignored, the user may get burned or a fire hazard may result!
WARNING! Danger from moving parts – keep fingers and other body parts away. This
symbol indicates the risk of injuries which may occur if the user reaches into the machine
during operation. Body parts may be smashed, drawn in, or injured in other ways.
For questions, please do not hesitate to email us at:
User´s Manual for Procusini
service@procusini.com
Page 7 of 33

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3.0 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents