Alignment Of The Production Plate; Cleaning; Cleaning The Cartridge; Cleaning The Dosing Tip - Procusini 3.0 User Manual

6.2

Alignment of the production plate

If you find that the production plate shows different distances to the dosing tip, you will have the
opportunity to compensate the distance. To do so, select "Settings – Alignment" and follow the
instructions on the user interface.
6.3

Cleaning

Cleaning the cartridge

Please use the provided cleaning hook.
Please remove the remains of the refill with the cleaning
hook before cleaning, before refilling the cartridge and at
the end of production. This step is not necessary, if you
have put a food item without refill into the cartridge, e.g.
3D Pasta or Cassis.
You can then clean the empty cartridge in a dishwasher.

Cleaning the dosing tip

• Please remove the dosing tip from the empty cartridge by unscrewing it.
• Fill the provided, empty syringe with hot water.
• Fix the used dosing tip onto the syringe.
• Squeeze out the remaining food from the syringe by thoroughly rinsing the dosing tip with
hot water.
Tip: You can also remove the food remains with a toothpick and afterwards rinse the dosing tip with
hot water.

Cleaning the stainless steel plunger

• Gently pull out the button on the side of the push
button in order to release the cartridge holder.
• Open the cartridge holder.
• Select "Settings – Cleaning" on your user
interface and follow the instructions.
Important! Screw on the stainless steel plunger only hand-tight!
Warning! The stainless steel plunger warms up. Let it cool down long enough before
removing it for cleaning.
For questions, please do not hesitate to email us at:
User´s Manual for Procusini
service@procusini.com
Page 27 of 33