Procusini 3.0 User Manual page 16


Calibration is necessary the first time you use the Procusini and every time you exchange
your production documents.

Click on "ok" to start the process.

Calibration is done using the arrow keys.
Attention: Just click on an arrow once, the system remembers the steps and if it clicks too often the
device could move into the production file and cause damage to the Procusini
• If the tip is about 1mm above the production platform, confirm with "Done".
• The Procusini is now back in its starting position.
For questions, please do not hesitate to email us at:
User´s Manual for Procusini
service@procusini.com
Page 16 of 33