Assembly Instructions - New Construction - Delta 110HLEDNL Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS
NEW CONSTRUCTION – ATTACHING TO THE JOIST
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. Attach the duct connector from the housing can
inside, and secure using the duct screw (M4x12).
Hardware
Duct Screw
C
2. If spacing between joists is 12 in. apart, use four
long wood screws (provided) to attach the fan body
❶ to ceiling joists, NO NEED FOR SUSPENSION
BRACKETS.
Body
Hardware
Long wood screw Suspension
A
Bracket I
Suspension
Bracket II
3. For joist spacing 16 in. - 24in., insert suspension
bracket I ❸ and suspension bracket II ❹ into the
bracket cover on the duct connector side and the
back of the fan body ❶ . Install the suspension
brackets to the joists with nails, and secure the
suspension brackets to the fan body ❶ by using the
short screws (provided).
Hardware
Short screw
B
Tab
1
Insert tab into
slot in housing
2
❶
3
❶
Body
Body
Suspension
❸
Suspension
Bracket I
Bracket I
Body
Suspension
Suspension
Bracket II
❹
Bracket I
Suspension
Bracket II
Suspension
Bracket II
5
Duct screw(M4X12)
from Parts Bag
Tab
Tab
Tab