Assembly Instructions - New Construction - Delta breez 110LED-ADJ Instructions Manual

ASSEMBLY INSTRUCTIONS
NEW CONSTRUCTION – ATTACHING TO THE JOIST
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. Attach the duct connector from the housing can
inside , and secure using the duct screw
a
(M4x12) .
b
Hardware
Duct Screw
C
2. If spacing between joists is 12 in. apart, use four
long wood screws (provided) to attach the fan body
to ceiling joists, NO NEED FOR SUSPENSION
1
BRACKETS.
Hardware
Long wood screw
A
3. For joist spacing 16 in. - 24in., insert suspension
bracket I and suspension bracket II
3
bracket cover on the duct connector side and the
back of the fan body
brackets to the joists with nails, and secure the
suspension brackets to the fan body
short screws (provided).
Hardware
Short screw
B
Joist
into the
4
. Install the suspension
1
by using the
1
1
Insert tab into
slot in housing
2
1
3
1 Body
Suspension
3
Bracket I
Suspension
4
Bracket II
5
Duct screw (M4X12)
from Parts Bag
b
a
Joist
Tab