Assembly Instructions - Existing Construction - Delta 110HLEDNL Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS
4. Remove the fan junction box cover a . Using wire
nuts (not supplied), connect house wires to fan
wires b as shown in the wiring diagram on page 4.
Reattach fan junction box cover c .
5. Connect a 4 in. circular duct a (not supplied)
and vent to the outside. Secure it with duct tape
(not supplied) or clamp (not supplied) to make the
connection secure and air tight.
6. Punch out Mask from packaging. Insert mask and
finish celling.
Mask protects unit during construction. Remove
before installing Grille.
EXISTING CONSTRUCTION – ACCESSIBLE FROM ABOVE
BEFORE INSTALLATION
Turn off power source. Review all safety precautions.
1. Remove existing fan.
4
c
5
joist
6
1
6
b
a
a
joist