Sampling Trace Function
5. Set "Mode" to "Free run", and set "Sampling Times" and "Sampling Rate".
6. Press the [Start Trace/Free run] button.
Drawing a chart starts, and sampling data for the specified number of samples is
performed.
7. Press the [Stop Trace/Free run] button to stop the trace.
Sampling at regular time intervals
PROCEDURE
1. Select "Tools" > "Time Chart" from the menu bar of FPWIN GR7.
2. Select "Sampling trace mode".
The time chart monitor screen appears.
3. Select "Set" > "Register Device" to register a bit/word device monitored.
4. Select "Set" > "Sampling Configuration".
5. Set "Mode" to "Trace", and set "Sampling Times" and "Sampling Rate".
6. Press the [Start Trace/Free run] button.
7. A message box appears. Select [Yes].
The trace operation begins.
7-4