8. Press the [Stop Trace/Free Run] button.
The time chart will be displayed after stopping the trace operation.
Sampling by instruction
PROCEDURE
1. Select "Tools" > "Time Chart" from the menu bar of FPWIN GR7.
2. Select "Sampling trace mode".
The time chart monitor screen appears.
3. Select "Set" > "Register Device" to register a bit/word device monitored.
4. Set "Mode" to "Trace", and set "Sampling Rate".
5. Check the check box of "Every SMPL instruction".
The sampling rate is automatically set to 0.
6. Press the [Start Trace/Free run] button.
7. A message box appears. Select [Yes].
The trace operation begins.
8. Press the [Stop Trace/Free Run] button.
The time chart will be displayed after stopping the trace operation.
7.1 Sampling Trace Function
7-5